User manual

Signamax Connectivity System 065-9066
www.signamax-us.com www.signamax-eu.com
GSM On GSM Network is found and working properly
Flashing Searching GSM Network
SMS ON Short message waiting Indicator
Flashing Sending short message
1.4.3 Rear Panel Descriptions
Port
PortPort
Port Description
DescriptionDescription
Description
Phone Phone port can be connected to analog telephone sets or Trunk Line
of PBX
Line Can be Connected to PBX or CO line with RJ-11 analog line. PSTN not
FXO port, can’t connect PSTN to VoIP,. When PSTN call comes, it will
transfer to FXS port, let FXS can pick up call from VoIP or PSTN.
GSM The port which you can Insert SIM Card
Antenna
Connector
Connect the antenna to the gateway.
WAN Connect to the network with an Ethernet cable. This port allows your
ATA to be connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a networking cable with RJ-45
connectors used on 10BaseT and 100BaseTX networks.
Reset Push this button until 3 seconds, and ATA will be set to factory
default configuration.
Power A power supply cable is inserted