User manual

Signamax Connectivity System 065-9066

www.signamax-us.com www.signamax-eu.com

1.1.

1. Outgoing Dial Plan:

Outgoing Dial Plan: Outgoing Dial Plan:

Outgoing Dial Plan:

Peer-to-Peer Call Mode: Effective

Registering to H.323 Gatekeeper (SIP Proxy Server) Mode: Effective

2.2.

2. Incoming Dial Plan:

Incoming Dial Plan: Incoming Dial Plan:

Incoming Dial Plan:

Peer-to-Peer Call Mode: Effective

Registering to H.323 Gatekeeper (SIP Proxy Server) Mode:

The leading number would

When you use direct call, you must setting your VoIP protocol firstly. Use direct call, you

should setting the same protocol both of UA. Both of UA must support dial plan function. Some

ATA don’t support Dialing plan, it maybe let direct call failed.

In the “Outgoing Dial Plan Configurations” settings: Maximum Entries : 50

In the “Outgoing Dial Plan Configurations” settings: Maximum Entries : 50In the “Outgoing Dial Plan Configurations” settings: Maximum Entries : 50

In the “Outgoing Dial Plan Configurations” settings: Maximum Entries : 50

 “Outbound number” is the leading digits of the call out dialing number.

 “Length of Number” has two text fields need filled: “Min Length” and “Max Length” is the

min/max allowed length you can dial.

 “Delete Length” is the number of digits that will be stripped from beginning of the dialed

number.

 “Add Digit Number” is the digits that will be added to the beginning of the dialed number.

 “Destination IP Address / Domain Name” is the IP address / Domain Name of the destination

Gateway that owns this phone number.

 “Destination Port” is port of the destination gateway use.(Default is 5060)