User manual

Signamax Connectivity System 065-9066
www.signamax-us.com www.signamax-eu.com
The hardware installation is now complete. The following sections will guide you through
setting up your management PC and connecting to the Web User Interface.
2.3 Setup
2.3 Setup2.3 Setup
2.3 Setup
There are 2 way to setting gateway - Web User
Web User Web User
Web User Interface,
Interface,Interface,
Interface, Telnet
Telnet Telnet
Telnet
2.3.1 Factory Default setting
 WAN
WANWAN
WAN Port IP address : 192.168.1.1
 Default login authentication username : admin, password : admin
username : admin, password : adminusername : admin, password : admin
username : admin, password : admin
065
065065
065-
--
-9066
90669066
9066 (VoIP feature)
(VoIP feature) (VoIP feature)
(VoIP feature)
 VoIP Number Port_1~Port_2 number:100,200
100,200100,200
100,200
 VoIP default setting was H.323
H.323H.323
H.323 signal protocol, Direct Mode
Direct ModeDirect Mode
Direct Mode, Fast
FastFast
Fast-
--
-Start
StartStart
Start and G.723
G.723 G.723
G.723 codec.
2.3.2 Setting Up Network
Checking the Network IP Configuration
Checking the Network IP ConfigurationChecking the Network IP Configuration
Checking the Network IP Configuration
The following explains how to setup the Transmission Control Protocol/Internet Protocol
(TCP/IP) in Windows 2000/XP. For more detailed information on TCP/IP setup, refer to the
Windows 2000/XP help files. For other operating systems refer to the user manuals.
1. On the desktop, Please enter start -> control panel -> network setting.” Click Properties.
The Network screen will open.