User manual

Signamax Connectivity System 065-9066
www.signamax-us.com www.signamax-eu.com
A
AA
Appurtenances:
ppurtenances:ppurtenances:
ppurtenances:
CD ROM
CD ROMCD ROM
CD ROM
CD Include in all product user manual and
datasheet.
RJ
RJRJ
RJ-
--
-45 cable
45 cable45 cable
45 cable
Internet cable RJ-45 connect to NIC/Gateway/Router
Antenna
Antenna Antenna
Antenna
This Antenna frequency is 900MHz/1800,1900Mhz
for automobile.
Power supply
Power supplyPower supply
Power supply
Power Supply,input:100-240V output:+12V
(Europe/UK/US)
2.2 Installation
2.2 Installation2.2 Installation
2.2 Installation
1.
1.1.
1. Install
Install Install
Install Gateway
Gateway Gateway
Gateway
1 Connect the 12V DC IN to the power outlet with power adaptor.
2 Connect Line to PSTN Line.
3 Connect Phone port to a telephone jack with the RJ-11 analog cable (Phone / PBX Trunk Line.)
4 Connect the antenna to the Antenna Connector.
5 Insert SIM card to the gateway
Warning: to avoid the product damaged, please insert SIM card before
power-on, and power-off first if it is necessary to take SIM card out of the
product.
2.
2.2.
2. Setting
Setting Setting
Setting up
up up
up the network
the networkthe network
the network environment for configuration
environment for configuration environment for configuration
environment for configuration
- To be able to enter the configuration system via web or telnet.
1. Connect the Ethernet cable (with RJ-45 connector) to WAN port.
GSM Gateway ----- RJ45 directly link ----- PC