User`s manual

Signamax Connectivity System 065-9013

www.signamax-us.com www.signamax-eu.com

Network 1-1-1

External mode

▌

STATIC ▌

Select Back

4. Enter the【External Mode】 menu. Select a correct IP addressing mode: Static,

DHCP or PPPoE.

1-1-1-1

&STATIC ▌

DHCP ▌

Select Back

3.1.2 Configure Network Parameters

 STATIC Mode

Select 【STATIC】 mode, enter the network parameters by the telephone keypad.

1. Enter the IP address. It is default separated into 4 parts; each part consists of

3 digits. For example: 192.168.1.58 can be entered as in sequence as

“1921681【RIGHT】58” or “1921681*58”.

Ext ip address

192.168. 1 .58

OK Back

2. Enter the gateway address.

Ext gw address

192.168. 1 . 4

OK Back

3. Enter the subnet mask address.

Ext subnet mask

255.255.255. 0

OK Back

4. Enter the DNS address. You can input 3 DNS servers, it is no need to input all

3 DNS entries.

Ext dns1

192.168. 1 . 4

OK Back