User`s manual

ManualsBrandsSignaMax ManualsComputer equipment065-9013

Signamax Connectivity System 065-9013

www.signamax-us.com www.signamax-eu.com

Signamax™ Connectivity Systems

VoIP IP Phone

Model:065-9013

User’s Manual

Summary of content (39 pages)

PAGE 1
Signamax Connectivity System 065-9013 Signamax™ Connectivity Systems VoIP IP Phone Model:065-9013 User’s Manual www.signamax-us.com www.signamax-eu.
PAGE 2
Signamax Connectivity System 065-9013 CONTENTS CONTENTS .................................................................................................................................................. 1 1. TECHNICAL PARAMETERS INTRODUCTION............................................................................... 4 1.1 CONTENTS .......................................................................................................................................... 4 1.1.1 Standard: .................
PAGE 3
Signamax Connectivity System 065-9013 4.1.8 Call Forward...................................................................................................................................... 31 4.1.9 Shared Lines Function........................................................................................................... 31 4.1.10 3-way Conference................................................................................................................ 31 4.1.11 Conference Function.............
PAGE 4
Signamax Connectivity System 065-9013 1. TECHNICAL PARAMETERS INTRODUCTION 1.1 Contents 1.1.1 Standard: Telephone base unit Handset Handset cord Power adaptor User’s manual 1.1.2 Optional: RJ-45 Ethernet cable Headset CD 1.2 Support Protocol SIP: RFC3261 DTMF: inband, RFC2833, SIP Info RTP: RFC1889 RTCP: RFC3605, RFC3611 DNS: RFC1035 FTP: RFC959 TFTP: RFC1350 HTTP: RFC1945, RFC2616 SNTP: RFC1361, RFC2030 SNMP: RFC1157 STUN: RFC3489 DHCP: RFC2131, RFC2132 PPPoE: RFC2516 NAT: RFC1631, RFC2663 1.
PAGE 5
Signamax Connectivity System 065-9013 1.4 Hardware Parameters 1.4.1 Standard: CPU: Infineon PSB21553 Data Memory: 8MB SDRAM Software Memory: 2MB Flash memory Ethernet Port: 2 RJ-45 plugs,IEEE802.3 10/100 Base-T Power Adaptor: Input 110-250V, Output 5V DC, 1A Keypad: 36keys LCD: 4x20 char-based, white backlight LED: 2 Leds 1.4.2 Optional: Data Memory: 16MB/32MB SDRAM Software Memory: 4MB/8MB Flash memory PoE: 802.3af LCD:128x64 Pixel-base with blue/white backlight Headset Port: RJ-7 or 3.5mm plug set 1.
PAGE 6
PAGE 7
Signamax Connectivity System 065-9013 2.2 Description NO.
PAGE 8
Signamax Connectivity System 6 7 REDIAL HOLD 065-9013 Dial out the last called number in talk/speakerphone mode Switch the input mode between the number and the character when editing Enter the list of number dialed During the call, put a call on hold Press and hold to enter the upgrade firmware menu Check the phone’s IP in idle mode 8 TRANSFER Transfer the call during a call 9 FORWARD Enter call forward setting menu 10 DND Enable Do Not Disturb function LINE1 LINE2 11 LINE3 Receive the new
PAGE 9
Signamax Connectivity System 16 17 RECORD SPEED DIAL 065-9013 Record call during conversation Play and Access the recorded messages Configure speed dial numbers Press the location number and 【SPEED DIAL】to dial out 18 MUTE Turn off the volume of the microphone during the call or ringing 1.@,:%!?<>() &'" abcABC2 defDEF3 ghIGHI4 jklJKL5 19 mnoMNO6 pqrsPQRS7 tuvTUV8 wxyzWXYZ9 CCITT keys, while entering words, press number key successively until the desired character appears.
PAGE 10
Signamax Connectivity System 065-9013 3. PHONE CONFIGURATION NOTE: 1. It will take 15 seconds to start up because of network initialization. Please wait and DO NOT cut off power. 2. DO NOT cut off power during upgrading. Maybe it will lead to fatal error. 3. The default user name and password of the phone and web configuration are user/000000 and root/111111. Please DO remember your password if you have it changed. 3.
PAGE 11
Signamax Connectivity System 065-9013 Network External mode 1-1-1 ▌ STATIC ▌ Back Select 4. Enter the【External Mode】 menu. Select a correct IP addressing mode: Static, DHCP or PPPoE. 1-1-1-1 &STATIC ▌ ▌ Back DHCP Select 3.1.2 Configure Network Parameters STATIC Mode Select 【STATIC】 mode, enter the network parameters by the telephone keypad. 1. Enter the IP address. It is default separated into 4 parts; each part consists of 3 digits. For example: 192.168.1.
PAGE 12
Signamax Connectivity System 065-9013 DHCP Mode 1. Select【DHCP】mode and return, there is no need to input any other parameter. Network External mode 1-1-1 ▌ DHCP ▌ Back Select PPPoE mode 1. Select【PPPoE】mode. Network External mode 1-1-1 ▌ PPPoE ▌ Back Select 2. Enter the PPPoE user ID provided by the service provider. The username for example below is “user”. PPPoE user ID User OK abc 4/40 Back 6/40 Clear 3. Enter the password. Password ****** OK abc 4.
PAGE 13
Signamax Connectivity System 065-9013 Enter 【External NIC】 menu or press 【HOLD】 in idle mode, then use 【W】 and 【 X】 to review all the parameters. 3.2 User Account Configuration 1. In idle mode, press 【OK】 to enter the main menu and select 【Root】 menu. And enter the root password. Settings User 2 ▌ &Root ▌ Back Select Password: ****** OK 123 6/20 Back 2. Enter【Line1 Settings】 menu, select 【Line1】 menu.
PAGE 14
Signamax Connectivity System 065-9013 Line1 Proxy 2-1-1-2 ▌ xxxx ▌ Back Port Select Proxy Port xxxx OK 123 4/6 Clear 5. Enter the username provided by service provider. Line1 UserName 2-1-1-3 ▌ 123456 ▌ Back Select UserName 123456 OK 123 6/40 Clear 6. Enter the auth name ( This parameter maybe is the same as username, or you can leave it blank ). Line1 Auth Name 2-1-1-4 ▌ ▌ Back Select Auth Name 123456 OK abc 6/40 Clear 7. Enter the password.
PAGE 15
Signamax Connectivity System 065-9013 Password ****** OK 123 6/40 Clear 8. Enter the realm address. Line1 Realm 2-1-1-6 ▌ xxx.xxx.xxx ▌ Back Select Realm xxx.xxx.xxx OK abc 11/40 Clear 9. If you need to setup parameters for register interval, heartbeat interval, options interval or DTMF mode and so on, configure them in a similar way. 10. Return the menu to one level up, select【Crypto1】 menu, input the encrypt server address.
PAGE 16
Signamax Connectivity System 065-9013 Encrypt server port 55060 OK 123 5/6 Clear 12. Enter the encrypt depth, 128 or 256. Crypto1 Sip Encrypt depth Select 2-1-2-3 ▌ 256 ▌ Back Sip Encrypt depth 256 OK 123 3/10 Clear 13. Select the Cryptographic algorithm. Crypto1 SIP crypt 2-1-2-4 ▌ None ▌ Back Select SIP crypt None 2-1-2-4-2 ▌ &AES ▌ Back Select 14. Return the menu to one level up, select 【Forward1】 menu to configure forward parameters.
PAGE 17
Signamax Connectivity System 065-9013 2-1-3-1-2 None ▌ &All ▌ Back Select 16. Enter the forward number. Forward1 Forward No 2-1-3-2 ▌ 10000 ▌ Back Select Forward No 10000 OK 123 5/39 Clear You can also press 【FORWARD】 key in idle mode to configure forward parameters, input the password of root, enter Forward menu to set them. 17. If you have more accounts, configure Line2 and Line3 in similar way. Please set the switch of Line2 and/or Line3 to 【on】， if you want to enable Line2 and/or Line3.
PAGE 18
PAGE 19
Signamax Connectivity System 065-9013 Select Back If using default setting, the route of upgrade will be directly to our update server, the parameters about such upgrade cannot be changed. Update config Use default 1-1 ▌ Yes ▌ Back Select If you want to set the route by yourself or set it to another address, please change “Use default” to “No”. Use dafault 1-1-1 &No ▌ ▌ Back Yes Select Enter the update server address. Update config 1-2 FTP Serveraddr ▌ xxx.xxx.
PAGE 20
Signamax Connectivity System 065-9013 Update config FTP Path 1-4 ▌ /update ▌ Back Select FTP Path /update OK abc 7/30 Clear Enter the username of server. Update config FTP User 1-5 ▌ user ▌ Back Select FTP User user OK abc 4/30 Clear Enter the password of server. Update config FTP Password 1-6 ▌ password▌ Back Select FTP Password password OK abc 8/30 Clear 4.
PAGE 21
Signamax Connectivity System 065-9013 3.5 Factory Settings NOTE: This operation will erase all parameters and reset them to factory settings, please consult the network administrator first. 1. Enter 【ROOT】 menu, select 【RESET】. Root Reset ▌ Select 2-7 ▌ Back 2. Press 【OK】, the phone will display warning message. Warning! This operation will delete all user settings. OK Cancel 3. Press 【OK】, the phone will restart automatically. Phone is rebooting. 3.
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
Signamax Connectivity System 065-9013 4. PHONE FUNCTIONS OPERATION 4.1 Call Functions 4.1.1 Make a Call 1. In idle mode, pick up the handset or press【HANDFREE】,or press【Line1】【Line2】【Line3】, dial the telephone number, press【#】to make a call. If there is a dial plan, the call number will be limited by the dial plan.
PAGE 29
Signamax Connectivity System 065-9013 Name1 ▌ Name2 ▌ Name3 ▌ Detail Exit Select the name, press【OK】, then select the tel number or mobile number, pick up handset or press【HANDFREE】to start the call. 3. Make a call from call log: In idle mode, press【CALL LOG】to select Missed/Received/Dialed call list and then select the number, then pick up handset or press 【HANDFREE】to start the call. 4.1.2 Redial In dialing mode, press【REDIAL】to call the last number dialed. 4.1.
PAGE 30
Signamax Connectivity System 065-9013 4.1.4 Receiving a Call When the phone is ringing, the incoming call number will be displayed on the LCD. Pick up the handset or press【HANDFREE】to answer the call. Ringing: 1 Ringing 1234567 2 Idle 3 Idle 00:00:00 1 Connected 1234567 2 Idle 3 Idle 00:00:04 1 Closed 1234567 2 Idle 3 Idle 00:00:00 Connected: Calling party hangs up: 4.1.5 Call Hold During a call, press【HOLD】 to put the call on hold. Press 【HOLD】again to resume the call.
PAGE 31
Signamax Connectivity System 065-9013 【LINE2】 to receive the new call (assume the new call is from LINE 2), and then the previous call will be held. And then press【LINE1】to resume the previous call and the new call becomes to be held. 4.1.8 Call Forward If call forward function is enabled, the incoming call will be forwarded to the number as per the configuration. Also refer to section 3.2, item 15 for the setup of call forward. 4.1.
PAGE 32
Signamax Connectivity System 065-9013 to deactivate the function. When the phone is ringing, press 【MUTE】, the ring will be shut off. 4.2 Time Setting 1. In idle mode, enter User setting menu. Select the option【Clock】. Set the date by entering year, month and day. User Clock 1-3 ▌ ▌ Back Select Clock Date Select 1-3-1 ▌ Fri 2006-08-04 ▌ Back ٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛٛ Current date: 2006-08-04 OK Back 2. Select【Time】. Set the time by entering hour, minute and second.
PAGE 33
Signamax Connectivity System 065-9013 &GMT＋08:00 GMT＋09:00 GMT＋10:00 OK Exit 4. To get the time from network time server, select【SNTP Server】. The phone has 9 time network servers. Select the desired server. Clock SNTP Server time-nw.nist.gov Select SNTP Server time-nw.nist.gov Select 1-3-4 ▌ ▌ Back 1-3-4-8 ▌ ▌ Back 5. Select【Synchronization】. The phone will start synchronizing with the network time server. Clock Synchronization Select 1-3-5 ▌ ▌ Back Time synchronizing... 4.
PAGE 34
Signamax Connectivity System 065-9013 Tones Ringing tone Select Ringing tone 1-2-1 ▌ Type 2 ▌ Back 1-2-1-2 &Type1 ▌ ▌ Back Type2 Select 2. Select【Ringing volume】. User can select the volume level (from level 1 to level 5). Tones Ringing volume 1－2－2 ▌ Level 2 ▌ Back Select 1-2-2-1 &Level1 ▌ ▌ Back Level2 Select 3. Incoming call alert. Tones Incoming call alert Select 1-2-3 ▌ Ringing ▌ Back 1-2-3-1 &Ringing ▌ ▌ Back Off Select 4.
PAGE 35
Signamax Connectivity System 065-9013 1-2-4-1 &Off ▌ ▌ Back Level 1 Select 4.4 SpeVolume of Call Adjusting In dialing mode or during a call, press【MIC】to adjust the microphone volume. Press【VOL】to adjust the volume of receiver (in handset mode) or speaker (in speakerphone mode). 4.5 Phonebook In idle mode, press【PHONEBOOK】to enter phonebook menu. 1. Select【ADD】to add new entry to the phonebook. You are prompted to input name. If no name is entered, it will be saved as “Noname”.
PAGE 36
Signamax Connectivity System 065-9013 Search by... 1 &Name ▌ ▌ Back Tel Select 3. Select【Erase】. User can delete items one-by-one or delete all items. NOTE: The deleted items cannot be recovered, so please be cautious when performing this operation. -Erase- 1 &One-by-one ▌ ▌ Back All Select 4.6 Call Log 1. In idle mode, press【CALL LOG】to enter the call log menu. Select missed calls, received calls or dialed call list.
PAGE 37
Signamax Connectivity System 065-9013 Save number to... &Tel 1 ▌ ▌ Back Mobile Select Name _ OK abc 0/20 Back ⅱ. EDIT: User can edit the telephone number. Reset number to: 123457 OK 123 6/20 Clear ⅲ. ERASE: The unit will prompt you if you are sure to erase the entry. Erase 123457? Yes No ⅳ. EMPTY LOG: The unit will prompt you to confirm if you want to empty the all entries of the selected call log. NOTE: The operation will delete all entries of selected log and cannot be recovered.
PAGE 38
Signamax Connectivity System 065-9013 4.7.2 Recording Function 1. Recording: Press【RECORD】during a call to record the phone conversation. Recording can be pauses and stopped. 2. Play back recording messages: In idle mode, press【RECORD】. 3. Delete recording messages: During message playback, press【OK】. WARNING: Recording of phone conversation may be illegal in some countries or areas. This phone only provides recording function and the company is not responsible for any legal disputes that may arise. 4.7.
PAGE 39
Signamax Connectivity System 065-9013 Aug 11 17:53:12 System locked Password<_ > IME:123 0/8 4.11 Hardware Examination The Phone has the hardware test program which is under 【Root】 menu. If user enter the menu by mistake, he/she can power off the unit to exit. Then power on the unit will reboot the phone back to idle mode. Root HD_TEST 2-9 ▌ ▌ Back Select 4.