Specifications

D
NETWORK
INTERFACE
CARDS
TM
www.signamax.eu
D2
PART NO. DESCRIPTION
098-1100FSCR 100BaseFX PCI Network Adapter Card – SC Multi Mode
098-1111 10/100 Mbps Fast Ethernet PCI adapter, RJ-45 STP
098-1100FSMR 100BaseFX PCI Network Adapter Card – SC Single Mode
Fast Ethernet PCI Adapter Cards
STANDARDS
IEEE 802.3u: 100BASE-TX
IEEE 802.3: 10BASE-T
BUS TYPE
PCI specification revision 2.1, 2.2
NETWORK INTERFACE
One shielded RJ45 phone-type jack
NETWORK MODES SUPPORTED
10BASE-T: CAT 3, 4, and 5 TP
100BASE-TX: CAT 5 TP cable
Full-duplex available in both modes
LEDs
LINK (Green), TX/RX (Green)
BOOT ROM (OPTIONAL)
64K Bytes with optional on-board
Boot ROM socket
DIMENSIONS
120 x 42 mm /4.72 x 1.65 inches)
ENVIRONMENT
Operating Temperature: 0° – 55°C
Storage Temperature: -20° – 70°C
Humidity: 10-90% Non-condensing
SOFTWARE SUPPORT
Windows 95/98/ME/ NT/2000/XP
Netware 3.x, 4.x, 5.x. Client 32,
NDIS 2.0 Drivers, Packet Driver, Linux,
SCO UNIX, Free BSD, DOS ODI
SPECIFICATIONS
098-1111, the most cost-effective solution for end users, is equipped with
Auto-negotiation function. Auto-negotiation function has become the basic
requirement of network adapters. It automatically supports data transmission
speeds ranging from 10 Mbps to 200 Mbps. This function smoothly
and automatically switches drivers between 10 Mbps and 100 Mbps,
Full- or Half-duplex, LAN connections.
Furthermore, an optional Boot ROM socket is provided to allow
administrators to boot diskless computers from remote servers. This
function is most frequently used for schools, libraries or other public
buildings. 098-1111 runs in 32-bit PCI bus master mode. It is compliant with
industrial standards and its drivers support all major operating systems.
Fast Ethernet PCI Adapter Cards
FEATURES
• Sturdy Single Chip Design Enhances Reliability and Ensures
Robust Running Usability
• Auto-negotiation Automatically Switches between 10/100 Mbps
and Full-/Half-duplex Modes
• Equipped with one optional Boot ROM Socket to Boot Diskless
Computers Remotely
• Fully Comply with IEEE 802.3u and IEEE 802.3 Standards
• Support IEEE 802.3x Flow-control for Full-duplex
• Shielded RJ45 Connector Provides Unified 100BASE-TX and
10BASE-T Network Media Interface
• Comply with PCI specification 2.1, 2.2
• Support ACPI, and PCI-Bus Power Management
• Compliant to PC99 and PC2001 Standards
Model 098-1111
Model 098-1100FSCR
Model 098-1100FSCR