Specifications

C
C19
ETHERNET
SWITCHES
NETWORK CONNECTIVITY SYSTEMS
www.signamax.eu
The Signamax Hardened series compact Fast Ethernet Switches are
equipped with 5-Port 10/100Base-TX or 4-Port 10/100Base-TX plus
1-Port 100Base-FX. By using standard auto-negotiation and the
inclusion of auto-MDIX, Signamax provides a cost-effective way of
integrating legacy 10 Mbps networks with 100 Mbps Fast Ethernet
networks. The TX ports auto-negotiate for 10/100 Mbps speed and
auto-detect Full or Half-duplex mode. The fiber port accommodates
SC and ST with a fiber connection between two nodes that can reach
up to 120 Km (74.4 miles). The Signamax hardened switch series can
be DIN-Rail mounted and is equipped with Terminal Block power input
to match the applications that require an Ethernet Switch.
Hardened Ethernet Switches
PART NO. DESCRIPTION
065-7405 Hardened Unmanaged Switch with 5-Port 10/100BaseT/TX
065-74051 Hardened Unmanaged Switch with 4-Port 10/100BaseT/TX + 1-Port 100BaseFX SC, MM
065-74052 Hardened Unmanaged Switch with 4-Port 10/100BaseT/TX + 1-Port 100BaseFX SC, SM
065-7401 Hardened Unmanaged Switch with 1-Port 10/100BaseT/TX + 1-Port 100BaseFX SC, MM
065-7402 Hardened Unmanaged Switch with 1-Port 10/100BaseT/TX + 1-Port 100BaseFX SC, SM
065-7408 Hardened Unmanaged Switch with 8-Port 10/100BaseT/TX
065-74081 Hardened Unmanaged Switch with 8-Port 10/100BaseT/TX + 1-Port 100BaseFX SC, MM
065-74082 Hardened Unmanaged Switch with 6-Port 10/100BaseT/TX + 2-Port 100BaseFX SC, MM
065-74084 Hardened Unmanaged Switch with 4-Port 10/100BaseT/TX + 4-Port 100BaseFX SC, MM
Hardened Ethernet Switches
SPECIFICATIONS
STANDARD
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX
IEEE802.3x
PERFORMANCE
Forward and Filtering Rate:
14,880 pps for 10 Mbps
148,810 pps for 100 Mbps
Packet Buffer Memory: 384 Kbits
Processing Type:
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size: 2,048 MAC addresses
Latency: Less than 5.1 μs
LEDs
Per Unit: Power Status (Power 1, Power 2)
Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow)
PHYSICAL CHARACTERISTICS
Power Input:
Input Voltage: 12 to 48V DC (Terminal Block)
Input Current: 0.1A Max. (Terminal Block)
Power Consumption: 2.4W Max.
Reverse Polarity Protection: Present
Mechanical Casing: Plastic case
Dimensions (W x D H): 25 x 70 x 110 mm
Weight: 0.2 Kg
Installation: DIN-Rail Mounting
Environment Operating Temperature: -10° – 60 °C
Storage Temperature: -25° – 85°C
Ambient Relative Humidity: 10-95% (non-condensing)
REGULATORY APPROVALS EMISSION COMPLIANCE:
FCC Part 15, Class A , CE
SAFETY
UL 60950
Model 065-7405
Model 065-7408
Model 065-74081