Specifications

C
ETHERNET
SWITCHES
TM
www.signamax.eu
C18
The Signamax L3 Switch is a high performance managed SNMP Layer 3 switch that provides users with
24 x 10/100 Mbps Ethernet and 4 Gigabit Combo ports. The Web/SNMP management provides remote
control capability that gives flexible network management and monitoring options. Whether managed
through “n-band” SNMP management station, internet web browser, or through “out-of-band” RS-232
console port, the 065-7428 facilitates network operational control and diagnosis.
For increased bandwidth application, 065-7428 can accommodate up to 32 trunk groups with LACP link
aggregation. Moreover, these trunk ports are with fair-over function to provide redundant back up if one or
more of ports are malfunctioning. It also supports both 802.1Q VLAN and GVRP VLAN Registration thereby
simplifying network traffic segmentation, broadcast domain extension and other associated benefits of
constructing VLANs. The abundance of features translates into increased efficiency and performance in
network administration.
24-Port 10/100BaseT/TX + 4G Combo L3 Switch
PART NO. DESCRIPTION
065-7428 L3 Managed 24-Port + 4G Combo Switch
065-7429 Advanced L3 Managed 24-Port 10/100BaseT/TX + 4G Combo Switch
24-Port 10/100BaseT/TX + 4G Combo L3 Switch
SPECIFICATIONS
STANDARDS
IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX,
IEEE802.3ab 1000Base-T,
IEEE802.3z 1000Base-X
MEDIA
UTP CAT3 or up for copper port,
Single-mode or Multi-mode fiber
(with SFP connect) for fiber port
CHIP
BCM5650+BCM5248+
BCM5464S+IXP420
ACCESS METHOD
CSMA/CD
MAC Address: 16K
Built-in Buffer: 256 Mbits
Data Transfer Rate:
10/100Mbps (Half-duplex),
20/200/2000 Mbps
(Full-duplex for coppoer port),
2000 Mbps only for fiber port
LEDs
Power, Link/Activity
ENVIRONMENTAL
TEMPERATURE HUMIDITY
Dimension (LxWlH):
438 x 250 x 44 mm
Weight: 5,000 g
Temperature:
0° to 50°C (operating),
-20° to 70°C (storage)
Humidity:
5 to 90% non-condensing (operating),
5 to 90% non-condensing (storage)
CERTIFICATIONS
FCC Part 15 Class A, CE Mark
FEATURES
• Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX,
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X specifications
• 24 port 10/100 Mbps TX Auto-Negotiation and 4 port 10/100/1000 Mbps TX
and 4 1000 Mbps SFP port (shared with 10/100/1000M port)
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Support up to 16K MAC address,16K IPv4 routing table
• Up to 256M bits packet buffer
• Supports Store & Forward architecture and performs forwarding
and filtering
• Supports Jumbo frame up to 9 KB
• Support RIP1/RIP2 routing
• Support OSPF routing
• VLAN 802.1q tag VLAN (up to 4K group)
• Support rate control (64 Kbps – 100 Mbps for Fast Ethernet port and
64 Kbps – 1,000 Mbps for Gigabits port )
• Support port mirror
• Support IEEE802.1D Spanning Tree and IEEE802.1w RSTP protocol
• Support Layer2-Layer7 packet classification and filtering at line rate
• Supports SNMP V1/V2, RMON MIB (group 1, 2, 3, 9)
• Supports access switch through Web/Telnet/Console
• Supports firmware upgrade through Web/Console
• Build-in power
Model 065-7428