Specifications

B
B19
MEDIA
CONVERTER
SYSTEM
NETWORK CONNECTIVITY SYSTEMS
www.signamax.eu
PART NO. DESCRIPTION
065-1197B 1000BaseT to 1000BaseLX, SM 10 km, SC
065-1176A 10/100BaseT/TX to 100BaseFX SC SM (20 km) Tx = 1,310, Rx = 1,550
065-1176B 10/100BaseT/TX to 100BaseFX SC SM (20 km) Rx = 1,310, Tx = 1,550
065-1186 16-Slot Basic Media Converter Chassis
Basic Media Converter
Signamax Fast Ethernet WDM Media Converters are designed to bridge
a 100Base-TX signal to a 100Base-FX signal. It's used to extend the
connection distance between two Fast Ethernet Twisted-pair devices
via fiber cable transparently with no performance degradation.
WDM Switching Media Converters utilize two different light spectra
with one end of a circuit transmitting on the other end’s receive
frequency (and vice versa), they must be used in A/B pairs. A circuit
utilizing these converters would therefore use a single strand of Single
Mode fiber optic cable plus one each of the 065-1176A and
065-1176B. It's supported Auto-negotiation & flow control function
on Twisted-pair port.
Basic Media Conveters
APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
FIXED PORTS
1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE
802.3u 100BaseTX standard specifications; Category 5 or better cable,
100 meters maximum distance for 100BaseTX, Category 3 or better cable,
100 meters maximum distance for 10BaseT plus 1 WDM fiber optic port
meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron
Single Mode fiber optic cable, spanning 20 kilometers maximum distance
(models 065-1176ALFS and 065-1176BLFS) or 1 WDM fiber optic port
meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron
Single Mode fiber optic cable, spanning 40 kilometers maximum distance
(models 065-1176AEDLFS and 065-1176BEDLFS)
PERFORMANCE
Latency: < 4.2 μs (LIFO) Throughput @
100Base: 148,809 pps (64-byte packets)
LEDs
Per unit: Power status, RJ45 port speed,
Per Port: LNK/ACT, FDX/COL
Six LEDs total
PHYSICAL CHARACTERISTICS
Case dimensions (L x W x H): 110 x 81 x 23 mm
Fiber optic interface varies with model
Weight: 150 grams
USB power connector on the rear panel optionally
powers converter from computer's USB port
SAFETY
UL Listed
SPECIFICATIONS
Model 065-1176A
Model 065-1186
Model 065-1197B