Specifications

B
B9
MEDIA
CONVERTER
SYSTEM
NETWORK CONNECTIVITY SYSTEMS
www.signamax.eu
PART NO. DESCRIPTION
065-1000 10/100BaseT/TX to 100BaseFX, Multi Mode/ST, 2 km
065-1010 10/100BaseT/TX to 100BaseFX, Multi Mode/SC, 2 km
065-1020 10/100BaseT/TX to 100BaseFX, Single Mode/SC, 20 km
065-1020ED 10/100BaseT/TX to 100BaseFX, Single Mode/SC, 40 km
065-1020XLD 10/100BaseT/TX to 100BaseFX, Single Mode/SC, 75 km
10/100BaseT/TX Switching Mini Fiber Optic Media Converters
Signamax Connectivity Systems’ Switching Mini Fiber Optic Media
Converters provide an intelligent solution for fiber optic connectivity
where simplicity, low cost, and minimum footprint are the primary
considerations. These converters are designed to handle both legacy
10BaseT and 100BaseTX Fast Ethernet devices on their twisted pair
port while maintaining 100BaseFX Fast Ethernet transmission on the
fiber optic port. Plug-and-play simplicity makes connection easy.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating
RJ45 twisted-pair connector port with Auto-MDIX capability for more convenient connection.
Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected
to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX
standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ45 port
is connected to a full duplex switch or a half duplex hub.
10/100BaseT/TX Switching Mini
Fiber Optic Media Converters
SPECIFICATIONS
APPLICABLE STANDARDS
IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE 802.3u 100BaseFX
FIXED PORTS
1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX
standard specifications; Category 5 or better cable, 100 meters maximum distance for
100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT
plus 1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification;
62.5/125 or 50/125 micron Multi Mode fiber optic cable, 2,000 meters maximum distance
(model 065-1010 & 065-1010) or 1 fiber optic port meeting IEEE 802.3u 100BaseFX
standard specification;
9/125 micron Single Mode fiber optic cable, spanning:
20 kilometers maximum distance (model 065-1020) or 40 kilometers maximum distance
(model 065-1020ED) or 75 kilometers maximum distance (model 065-1020XLD)
Model 065-1010
Model 065-1000
PERFORMANCE
Latency: <4.2 μs (LIFO)
Throughput @ 100Base: 148,809 pps
(64-byte packets)
LEDs
Per Port: LNK/ACT TX, LNK/ACT FX
Two LEDs total
PHYSICAL CHARACTERISTICS
Case dimensions (L x W x H):
80 x 54 x 22 mm (3.15 x 2.13 x 0.87")
Fiber optic interface varies with model.
Weight: 0.122 kg
SAFETY
UL Listed