Specifications

M
M1
DATA
RACKS
NETWORK CONNECTIVITY SYSTEMS
www.signamax.eu
19" Data Racks
Attractive design and high quality are hallmarks of these data racks. Their basic framework is welded
metal plate, multiple-bent for the strength and rigidity necessary for heavier equipment. All profile
moldings are flexible and adjustable. Vent slots in the upper or lower cabinetry allow airflow for
efficient cooling. The door is made of safety glass, and can be mounted for either left or right-hand
opening on either the front or rear of the data rack. The side-walls and door are assembled and
provided with ground straps. These data racks can also be interconnected into sets, for larger switch
or server rooms.
Fan units
Can be mounted in the lower and/or the upper part of the enclosure without effecting available rack space. Dust filter included.
Wheels
Four wheels, two of which are adjustable. (available on request)
Supply includes
4 adjustable feet, Brush insert (foam insert), Door lock including set of 2 keys.
Colour and material
1.4 mm sheet steel, shaded 4 mm safety glass. Grey colour (RAL 7035), black colour (RAL 9005).
Adjustable feet
All feet can be adjusted up to 20 mm to compensate for uneven floors and assure high stability.
Door lock
Adjustable 3-point lock on the front door.
Front and side access
The door and sidewalls can be easily removed.
Cable entry
Via the slot in the lower back side and through the top of the rack, either through brushes or gasket foam.
Entry from the top of the rack is available on special request.
Profile moldings
Four profile moldings are easily adjustable.
1. Skeleton
2. Glass door (right-or left-hand) (three-point bar locking)
3. Flush door (upon request only) (right-or left-hand)
(three-point bar locking)
4. Side cover
5. Rear cover (right-or left-hand) (three-point bar locking)
6. Cable opening
7. Ceiling cover
8. Cross bar
9. 19" Frame
10. Filter (both in the bottom and the ceiling)
11. Adjustable feet
12. Travel wheels (upon request only)
13. Roof cover