Specifications

J
PATCH
CORDS
TM
www.signamax.eu
J4
E079X
T-Adapters and Testers
When installing a cabling system, checking for open or short circuits is
always a requirement. Signamax remote cable testers answer the need
for testing T568A, T568B, 10BaseT, 10Base2, 10Base5 and Token Ring
systems, for UTP and STP cabling.
Inline Couplers and Connection Boxes
Inline couplers and connection boxes allow a simple operation with installation cables, which can be easily
extended. Broken cables can be coupled with no need to install new complete cable segment. Connection
boxes can be used for all standard 4- to 8-wire installation cables of 26-22 AWG up to 10 mm outer diameter.
T-Adapters must be used in pairs.
Remote Cable Tester with USB Port
PART NO DESCRIPTION
E097X Remote Cable Tester with USB Port
T-Adapters
PART NO DESCRIPTION
TA-V1 T-Adapter for splitting 4-pair Outlet to
one 10Base-T and one Telephone Outlet
TA-V2 T-Adapter for splitting 4-pair Outlet to two 10Base-T Outlets
TA-V3 T-Adapter for splitting 4-pair Outlet to two Telephone Outlets
Inline Couplers and Connection Boxes
PART NO DESCRIPTION
KRJ45-S Inline Coupler E-TA 8/8 unshielded RJ45 UTP
KRJ45-VEBB Inline Coupler E-TA 8/8 shielded RJ45 STP
KRJ45-VEB6 Connection Box LSA+ up to 600 MHz, Cat6, unshielded
KRJS45-VEB6 Connection Box LSA+ up to 600 MHz, Cat6, shielded
KRJ45-VEB5 Connection Box LSA+, Cat5e, unshielded
KRJS45-VEB5 Connection Box LSA+, Cat5e, shielded
KRJ45-VEB6
KRJS45-VEB6
TA-V1
KRJ45-VEB5