perfection Solutions 2008
K E E P I N G Y O U R W O R L D C O N N E C T E D Signamax LLC, a US based company, is uniquely focused on providing high-performance networks and complex distribution solutions for customers worldwide. We provide complete unified products for copper and fiber based network connections designed for increased performance, reliability and easy installation. Signamax components are also popular for their valued performance/price ratio.
Table of Content Network Connectivity Systems F: Wireless LAN A: Triple Play IP Phones VoIP ATA Gateway VoIP Gateway VoIP Gateway w. SIP Proxy Server VoIP Gateway w.
Keeping Your World In today’s technology driven environment, the backbone of your organization is your network—keeping you connected to staff, customers, suppliers, and the world at large. To run a successful enterprise, you need a network that is reliable, fast, and ready to accommodate the inevitable growth and change you will experience. We are the company that can deliver you network solutions that are up to all those challenges, we are Signamax Connectivity Systems.
Connected The Signamax Premise Connectivity System enables you to build a network infrastructure that can accommodate all your network applications. This system is comprised of wiring solutions for your equipment room, distribution cabling and cross-connects to your work-areas with a wide-range of high-performance copper & fiber-optic components, all designed to work together as a system.
NETWORK CONNECTIVITY SYSTEMS
Triple Play A IP Phones VoIP ATA Gateway VoIP Gateway VoIP Gateway w. SIP Proxy Server VoIP Gateway w. H.
A TRIPLE PLAY IP Phones Signamax, delivers stable, low-cost and fully featured IP telephones to customers. 065-9013 Signamax VoIP SIP Phone conforms to SIP standard and support ADSL, Cable Modem, LAN and WAN, ideal for both enterprise and home users. 065-9011 is a full-featured IP-based telephone set for home telephony via Ethernet base communication. It supports SIP RFC3261 protocol. Two 10/100BaseT embedded switch/hub RJ-45 ports allow connect to office LAN and PC on your table.
A TRIPLE PLAY SPECIFICATIONS 065-9005 PERFORMANCE CHARACTERISTICS Call Control Protocol: SIP (RFC2543/RFC3261) Codec: G.711 / G.729a Battery: 3.6 V, 1,350 mAhr Lithium Battery Life: 3.2 hr talk time, 24 – 26 hours standby Wireless Access Protocol: CSMA/CA Frequency Range: 2.4 – 2.497 GHz Number of Channel: Up to 14 channels Data Rate: 802.11b Direct Sequence Rate Scaling at 1, 2, 5.5, and 11 Mbps Range RF output: 30 mW peak Outdoor: 1,000 +ft./300 +m Indoor: Up to 295 ft.
A TRIPLE PLAY VoIP ATA Gateway When you use your high-speed Internet connection to make phone calls, you'll lower your monthly phone bills and add services and features not available with traditional phone service. The Signamax ATA Gateways enables high-quality feature telephone service through your high speed Internet access (Cable or DSL Internet connection).
A TRIPLE PLAY VoIP Gateway The 065-9200S/065-9400S Series VoIP Gateway is fully both H.323 and SIP standard compliant residential gateway that provides a total solution for integrating voice-data network and PSTN. By simple installation, this revolutionary compact voice over IP (VoIP) gateway could be configured as a 2/4 FXS/FXO VoIP Gateway which provides voice connectivity over the IP network and to the Public Switched Telephone Network (PSTN).
A TRIPLE PLAY VoIP Gateway This Signamax 065-9400SVR and 065-9200SVR Series SIP Proxy Server is designed as an embedded-based platform. It performs internet telephony services, like registration status, call detail record and security registration policy. The Signamax 065-9400SVR provides a comprehensive, powerful platform for delivering IP telephony applications based on the Session Initiation Protocol (SIP). It also build in VoIP 2/4 voice channels Gateway which support SIP signal protocols.
A TRIPLE PLAY Modular High Density VoIP Gateway By Modular hardware design 065-9850/065-9854/065-9858 Series makes any combination of the telephone interface. The Signamax 065-9850/065-9854/065-9858 Series VoIP Gateway is fully SIP and /H.323 standard compliant high density gateway that provides a total solution for integrating voice-data network and PSTN.
A TRIPLE PLAY IP PBX Full featured Internet Telephone IP PBX System for SOHO and Enterprises! Signamax 065-9101 combines complete IP-PBX features with standards based SIP for telephony solution that can stand alone or integrate with existing phone systems. 065-9101 is an embedded system with built-in SIP Proxy Server and NAT router for SOHO user not only provide network function but also provide an IP PBX feature in office.
A TRIPLE PLAY IP DSLAM 065-9074/8 Series IP DSLAM has 24/48 ports subscriber line interface with POTS splitter built-in achieved 1U height space saving design. 065-9074/8 Series came with unique bandwidth management, flow prioritization and data flow security control key feature. 065-9074/8 Series provided QoS (quality of service) capability to meet triple play (voice, data, video) requirement, support ADSL/ADSL2/ADSL2+/G.SHDSL interface, stackable up to 8 065-9074/8 can be cascaded.
A TRIPLE PLAY ADSL 2/2+ Routers Signamax ADSL routers are designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The ADSL (Asymmetric Digital Subscriber Line) connection is made using ordinary telephone line. Signamax provide latest ADSL 2+ standards for high speed Internet access (up to 24Mbps for Downstream). With a built-in 4-Port switch (0659088/065-9089), up to four computers or devices can simultaneously be connected and share Internet access.
A TRIPLE PLAY SPECIFICATIONS ADSL COMPLIANCE Full-rate ANSI T1.413 Issue 2 ITU G.992.1 (G.dmt) Annex A and B Splitterless ITU G.992.2 (G.lite) specification ITU G.992.5 (ADSL2plus) ITU G.994.1 (G.hs), ITU G.992.3 (G.dmt.bis / ADSL2) Supports splitterless ADSL implementation Supports Dying Gasp ATM SUBSYSTEM PPP over ATM (RFC 2364), Bridged IP over ATM (RFC 1483) PPP over Ethernet (RFC 2516), ATM Forum UNI 3.1/4.
A TRIPLE PLAY IP Camera Signamax 065-9001 Internet Camera and 065-9003 Internet Wireless Camera, a camera device that can be connected directly to an Ethernet or Fast Ethernet network also supported by the wireless transmission based on the IEEE 802.11g standard 065-9003. Compared to the conventional PC Camera, the Internet Camera features a built-in CPU and web-based solutions that can provide a cost-effective solution to transmit real-time high-quality video images and sounds for monitoring.
A TRIPLE PLAY SPECIFICATIONS IMAGE SENSOR Sensor resolution: 640 x 480 pixel Sensor: Color CMOS Sensor Lens: f: 6.0 mm, F: 1.
A TRIPLE PLAY IP Set Top Box 065-9021 is an IP STB fully compatible with ISMA standard. It is widely used in communities, hotels and broadband environment for receiving MPEG-4 liveprogram and VOD. Meanwhile, with the support of head-end system, 065-9021 can be used for video shopping, network games, support EPG and so on.
A TRIPLE PLAY SPECIFICATIONS NETWORK PROTOCOLS HTTP 1.0/1.1, DHCP, NTP1.1 and IGMPV1/V2.
NETWORK CONNECTIVITY SYSTEMS
Media Converters Switching Fiber Converters 10/100 to 100BaseFX Power over Ethernet Fiber Media Converters Switching Managed Media Converters B 10/100BaseT/TX Switching PCI Fiber Optic Media Converters VDSL Ethernet Extender 10/100BaseT/TX Switching Mini Fiber Optic Media Converters Stand Alone Managed Switching Media Converters Hardened Media Converters with LFS Single Channel Hardened Media Converters Gigabit Media Converters 10/100/1000 Switching Fiber Optic Media Converters SFP Fiber Converters Serial
B MEDIA CONVERTER SYSTEM Switching Fiber Converters Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet or 1000Base Gigabit Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX.
B MEDIA CONVERTER SYSTEM SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX FIXED PORTS Models 065-1100/1110/1170/1172/1174/1120/1120ED/1120XLD: 1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.
B MEDIA CONVERTER SYSTEM 10/100 to 100BaseFX Power over Ethernet Fiber Media Converters The Signamax 065-1050 series Media Converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection.
B MEDIA CONVERTER SYSTEM SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3u 100BaseFX IEEE 802.3af Power over Ethernet (PoE) FIXED PORTS models 065-1050ST, 065-1050SC, 065-1050SM, 065-1050SMED, 065-1050SMXLD: 1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.
B MEDIA CONVERTER SYSTEM Switching Managed Media Converters Signamax Connectivity Systems’ 065-1400 series Managed Switching Media Converters are modular SNMP-managed media converter cards available with a variety of interfaces to provide copper-to-fiber conversion for mission-critical networks.
B MEDIA CONVERTER SYSTEM SPECIFICATIONS APPLICABLE STANDARDS IEEE 802.3u 100BaseFX IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX FIXED PORTS 100BaseFX models: 1 ST duplex fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125 micron Multi Mode fiber optic cable, 2,000 meters maximum distance; 1 SC duplex fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.
B MEDIA CONVERTER SYSTEM 10/100BaseT/TX Switching PCI Fiber Optic Media Converters Signamax Connectivity Systems’ Switching PCI Fiber Optic Media Converters are an excellent solution for fiber-to-the-desktop installations where the workstation computers have pre-installed Network Interfaces.
B MEDIA CONVERTER SYSTEM VDSL Ethernet Extender The Signamax VDSL Ethernet Externder is a point-to-point DSL solution that efficiently extends 10/100 Ethernet circuits to over 600 meters (1,960 feet) at 30 Mbps using existing straight pair copper wire. The 065-1138 will allow Ethernet Networking in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial communications to Ethernet networkig.
B MEDIA CONVERTER SYSTEM 10/100BaseT/TX Switching Mini Fiber Optic Media Converters Signamax Connectivity Systems’ Switching Mini Fiber Optic Media Converters provide an intelligent solution for fiber optic connectivity where simplicity, low cost, and minimum footprint are the primary considerations. These converters are designed to handle both legacy 10BaseT and 100BaseTX Fast Ethernet devices on their twisted pair port while maintaining 100BaseFX Fast Ethernet transmission on the fiber optic port.
B MEDIA CONVERTER SYSTEM Stand Alone Managed Switching Media Converters Signamax Connectivity Systems’ 065-1600 series Stand Alone Managed Switching 10/100 Media Converters are individually-housed SNMP-managed media converters available with Single Mode and Multi Mode interfaces to provide copper-to-fiber conversion for mission-critical networks.
B MEDIA CONVERTER SYSTEM Hardened Media Converters with LFS Signamax has responded to the demands of fiber optic deployment in rugged environments by introducing the 065-1800 series of hardened media converters. The 065-1800 series provides flexibility in connector types with the extended temperature and humidity ranges required for high-risk installations.
B MEDIA CONVERTER SYSTEM Single Channel Hardened Media Converters Signamax offers its Hardened Media Converter Series as a concrete and affordable answer in response to an increase in fiber optics cabling deployment. Signamax's 065-1830 Series is one of the most complete solutions in media conversion. 065-1830 Series are available in all varieties of fiber connectors and 065-1830, fiber multi-mode/single-mode to Single Mode fast Ethernet media converter, comes in a wide range of selections.
B MEDIA CONVERTER SYSTEM Gigabit Media Converters Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over Multi Mode or Single Mode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the model 065-1185 16-Bay Signamax Rack Mount Chassis.
B MEDIA CONVERTER SYSTEM 10/100/1000 Switching Fiber Optic Media Converters Signamax Connectivity Systems’ 10/100/1000 Switching Media Converter provides an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and the newer 1000Base Gigabit Ethernet networks.
B MEDIA CONVERTER SYSTEM SFP Fiber Converters The Signamax 10/100/1000 to 1000SX/LX (SFP) Media Converter is specifically designed to offer fiber advantages for mission-critical networks like Telco/ISP backbones, cable operators, banking and enterprise networks. It can reduce network downtime and increase Quality of Service levels. The converter is completely transparent when installed, so the network performs exactly the way it would do normally—only now, it can incorporate both copper and fiber mediums.
B MEDIA CONVERTER SYSTEM Serial Data to Fiber/TP Media Converters Signamax Connectivity Systems’ Serial Data Fiber Media Converters make it simple to extend distances over Multi Mode or Single Mode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications.
B MEDIA CONVERTER SYSTEM Single Fiber WDM Converters Signamax Connectivity Systems’ Switching Single Fiber Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data typically carried over two strands of fiber optic cable to be carried over a single strand of fiber optic cable, utilizing two different wavelengths to carry signals in both directions simultaneously.
B MEDIA CONVERTER SYSTEM Singlemode to Multi Mode Converters Signamax Connectivity Systems’ Singlemode to Multi Mode Converters provide efficient solutions for interconnecting Multi Mode fiber LANs over longer distances by integrating Single Mode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a Multi Mode interface to Single Mode fiber carrier demarcation points.
B MEDIA CONVERTER SYSTEM Basic Media Conveters Signamax Fast Ethernet WDM Media Converters are designed to bridge a 100Base-TX signal to a 100Base-FX signal. It's used to extend the connection distance between two Fast Ethernet Twisted-pair devices via fiber cable transparently with no performance degradation. WDM Switching Media Converters utilize two different light spectra with one end of a circuit transmitting on the other end’s receive frequency (and vice versa), they must be used in A/B pairs.
B MEDIA CONVERTER SYSTEM 12-Port Rack Mount Media Converters The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers.
B MEDIA CONVERTER SYSTEM 16-Bay Media Converter Rack Mount Chassis The Signamax 065-1185 16-Bay Media Converter Rack Mount Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure.
B MEDIA CONVERTER SYSTEM 18-Bay Rack Mount Managed Media Converter Chassis System The Signamax™ 065-1480 18-Bay Managed Media Converter Rack Mount Chassis provides full SNMP management capabilities for mission-critical installations. The 065-1480 provides 18 bays of space for all 065-14xx series Signamax managed media converters in a standard 2U high enclosure. It also includes the 065-1481 Management Module, which communicates with the Signamax 065-14xx series media converters on the chassis’ backplane.
B MEDIA CONVERTER SYSTEM 8-Bay Managed Media Converter Chassis Through out-of-band management via Web Browser, the Managed Media Converter System can be monitored and configured. Each 065-1400M Managed Converter Chassis features eight slots for 065-1485 Chassis Manager Media Converter and 065-1400CO Media Converters (CO) in one Managed Converter Chassis.
B MEDIA CONVERTER SYSTEM WebSmart Media Converters Signamax Connectivity Systems’ 065-1300 series Standalone WebSmart Switching Media Converters are individually-housed WebSmart media converters available with Single Mode and Multi Mode interfaces to provide copper-to-fiber conversion for mission-critical networks.
B MEDIA CONVERTER SYSTEM 16-Slot Chassis for Modular EPON Media Converters The manageable box is a 19" Media Converter Chassis with cabinet height 3U. It is designed to accommodate 16 slots of various type of fiber media converter module at a central location for multiple segments cross connection and network management. Any combination of GEPON Fiber conversion solutions can be installed in a wiring closet for cable connection.
B MEDIA CONVERTER SYSTEM KEY FEATURES • Supports standard 19" 3U high rack-mount chassis with 16 slots for converter modules • 19-inch rack mount - The concentrator unit will fit in both Electronic Industries Association (EIA) standard compliant racks.
NETWORK CONNECTIVITY SYSTEMS
Ethernet Switches 5- & 8-Port 10/100 Desktop Switches 8-Port 10/100 Desktop PoE Switches 8-Port Managed Desktop Switches C Desktop Web Smart Fast Ethernet Switch Fast Ethernet 16-Port Desktop Switches 10/100BaseT/TX Rack Mount Unmanaged Ethernet Switch 16-Port WebSmart 10/100 Managed Ethernet Switches Gigabit POE Management Switch series Modularized 24+2G Access Switch Metro and Metro PoE Stackable Switches with 2 Combo ports Metro Stackable Switches with 4 Combo ports Compact Fiber Access Switch 5- and 8
C ETHERNET SWITCHES 5- & 8-Port 10/100 Desktop Switches Signamax Connectivity Systems’ Desktop Switches makes it easy to increase user capacity and let 10 and 100 Mbps devices directly communicate with each other. Full duplex mode multiplies total network capacity by providing up to 200 Mbps bandwidth per port rather than sharing 100 Mbps bandwidth between hub users, and segments networks for improved performance by forwarding traffic only to the users to whom the message was sent.
C ETHERNET SWITCHES FEATURES • Non-blocking Performance Improves Access to Network Resources • Five/eight Independent Bandwidths with 10-200 Mbps Capability • All Ports Support Auto-negotiation and Auto-MDI/MDI-X to Facilitate Installation and Troubleshooting • Full Wire Speed Store-and-Forward Technology Instantly Eliminates Bad Packets • Automatic Source Address Learning and Aging • Support 1K MAC Address • Built-in High Efficiency SRAM for Packet Buffer • Support IEEE 802.
C ETHERNET SWITCHES 8-Port 10/100 Desktop PoE Switches The Signamax 065-7013PD is 8-Port Ethernet Switch consists of 8 Ethernet ports, port No. 8 can be either Ethernet port or PD port for DC power input. Connect PD port with POE switch to enhance your networking environment, user will not compromise to the electrical system. Model 065-7308PoE Model 065-7013PD 8-Port 10/100 Desktop PoE Switches PART NO.
C ETHERNET SWITCHES 8-Port Managed Desktop Switches The Signamax 065-7508/065-7708 switches ares an full L2 management 8-Port Fast Ethernet switches, with high performance and competitive price. They are perfect way to extend your network structure. KEY FEATURES • 11" Metal Case • Rack-Mount to 19" Cabinet • No Fan No Noise • Internal Power Supply Model 065-7508 • Web-based Configuration and Management Model 065-7708 8-Port Managed Desktop Switches PART NO.
C ETHERNET SWITCHES Desktop WebSmart Fast Ethernet Switch 065-7542 is 24-Port Desktop WebSmart Fast Ethernet Switch that is designed for small or medium network environment to strengthen its network connection. This product is compact in size, making it ideal for Desktop users with limited space. It also gives you the option of installing it in a 19" cabinet by rack-mount kits or underneath a desk.
C ETHERNET SWITCHES Fast Ethernet 16-Port Desktop Switches The Signamax 16-Port Ethernet Switches are designed to allow simultaneous transmission of multiple packets via an internal high-speed data channel. This means that it can partition a network more efficiently than bridges or routers in most environments. Signamax 16-Port Ethernet Switch is a highly reliable network Switch and is the ideal device for bridging Ethernet to Fast Ethernet workgroups or networks.
C ETHERNET SWITCHES 10/100BaseT/TX Rack Mount Unmanaged Ethernet Switch Signamax Connectivity Systems’ 10/100BaseT/TX Ethernet Switches feature 24 10/100 ports, with the 065-7341 model. This model transparently pass packets of up to 1,522 bytes, allowing its use in networks utilizing IEEE 802.1p and IEEE 802.1Q tagged packets. In addition, these models support 8K MAC addresses, and provide a true non-blocking switching architecture with full wire speed forwarding.
C ETHERNET SWITCHES 16-Port WebSmart 10/100 Managed Ethernet Switch Signamax Connectivity Systems’ WebSmart 10/100 Ethernet Switches feature 16 10/100 ports, an optional 100BaseFX Multi Mode or Single Mode fiber module for longer distance network connections, and easy web-based administration. Fiber optic Multi Mode or Single Mode expansion module options allow installation of fiber cabling anywhere within your existing copper-based network.
C ETHERNET SWITCHES Gigabit POE Management Switch series Signamax Gigabit switch 065-7820 POE supports 12x 10/100/1000 Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. It is equipped with 12 Giga TP ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules.
C ETHERNET SWITCHES Modularized 24+2G Access Switch Emanating from our expertise in developing network communication solutions, the 065-7750 Modularized 24-Port Ethernet Managed Switch incorporates leading switching technology and high-port density within a slim 1-rack unit chassis. The 065-7750 represents an industry first as no other switch in the market today can match the unique 3 x 8-Port modular, 2 GBIC slots plus console port design.
C ETHERNET SWITCHES Metro and Metro PoE Stackable Switches with 2 Combo Ports Signamax Connectivity Systems’ new stackable Metro Ethernet Power over Ethernet (PoE) Access Switch provides the capability to remotely power wireless access points, VoIP telephones, Powered Device (PD) Media Converters, and other devices that meet the IEEE 802.1af PoE standard. These switches provide non-blocking performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet ports plus 24 10/100BaseT/TX PoE-equipped ports.
C ETHERNET SWITCHES Metro Stackable Switches with 4 Combo Ports The Signamax 065-7708 switch is an full L2 management 8-Port Fast Ethernet switch, with high performance and competitive price. It's a perfect way to extend your network structure. The Signamax 065-7728 switch is an full L2 management 24-Port Fast Ethernet switch plus 4 Gigabits port (support auto copper/fiber switching), with high performance and competitive price. It's a perfect way to extend your network structure.
C ETHERNET SWITCHES Compact Fiber Access Switch Signamax’ Connectivity Systems’ Compact Fiber Access Switches provide the right port interface you need for fiber-extended networks. The 065-7111 series of switches allows cost-effective fiber extension to small workgroups and Programmable Logic Controller (PLC) clusters.
C ETHERNET SWITCHES 5- and 8-Port 10/100/1000BaseT/TX Desktop Switches Signamax Connectivity Systems’ 10/1001000BaseT/TX Desktop Switches make it easy to increase user capacity and provide Gigabit Ethernet to devices in a small workgroup. Auto-sensing speed, duplex mode, and Auto-MDIX features automatically handle 10 Mbps, 100 Mbps, and 1,000 Mbps users.
C ETHERNET SWITCHES WebSmart Gigabit Ethernet Switches Signamax Connectivity Systems’ 16- and 24-Port WebSmart™ Gigabit Ethernet Switch features 16 or 24 10/100/1000BaseT/TX twisted-pair ports to extend Gigabit Ethernet to your servers and workstation users with high-bandwidth requirements. This switch also includes advanced support for port-based Virtual Local Area Networking (VLAN) and multi-port inter-switch trunking for use in larger-scale networks.
C ETHERNET SWITCHES Gigabit Management Switch The 065-7840/065-7850 is a L2 managed Gigabit switch that supports SNMP, Web UI and CLI management interface. It is equipped with 24/8 Giga TP ports and 2/16 Giga ports which accommodate optional SFP modules. In addition, the switch implements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. It is suitable for workgroups or WAN edge application. Model 065-7850 Model 065-7840 Gigabit Management Switch PART NO.
C ETHERNET SWITCHES Advanced Gigabit L2 Managed Switches 065-7841/065-7851, a 24-Port Gigabit L2 Managed Switches, is a standard switches that meet all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switches include 24-Port 10/100/1000 Mbps TP and 4-Port Gigabit TP/SFP Fiber management Ethernet switch. The switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management unit, associated with SNMP agent.
C ETHERNET SWITCHES 24-Port 10/100BaseT/TX + 4G Combo L3 Switch The Signamax L3 Switch is a high performance managed SNMP Layer 3 switch that provides users with 24 x 10/100 Mbps Ethernet and 4 Gigabit Combo ports. The Web/SNMP management provides remote control capability that gives flexible network management and monitoring options.
C ETHERNET SWITCHES Hardened Ethernet Switches The Signamax Hardened series compact Fast Ethernet Switches are equipped with 5-Port 10/100Base-TX or 4-Port 10/100Base-TX plus 1-Port 100Base-FX. By using standard auto-negotiation and the inclusion of auto-MDIX, Signamax provides a cost-effective way of integrating legacy 10 Mbps networks with 100 Mbps Fast Ethernet networks. The TX ports auto-negotiate for 10/100 Mbps speed and auto-detect Full or Half-duplex mode.
C ETHERNET SWITCHES Hardened Managed Switches The 065-741xx series, managed, Ethernet switches are designed to operate in the harsh environments at the edge of the network. Whether on the factory floor or the street corner, the 065-741xx will provide flawless communications when you need it most. The 065-741xx is a managed switch with the flexibility of eight 10/100 Ethernet ports that may be configured in various combinations of copper and fiber optic interfaces.
C ETHERNET SWITCHES 4-Port Broadband Access Router The Signamax 065-1507 Broadband Access Router is an intelligent solution for sharing Calble Modem or DSL services between home computers, small office computers, or branch office installlation. The built-in 4-Port switch facilitates file sharing at either 10 Mbps or 100 Mbps, automatically determining the fastest possible connection speed and duplex mod.
C ETHERNET SWITCHES Signamax USB NAS Signamax 065-1520 USB NAS can quickly and easily connect USB 2.0 hard drives. Add Gigabytes of storage to your existing LAN. You can connect up to 4 additional hard drives to provide over 1 Terabyte of shared storage for your networked computers, Windows, Mac and Unix. A great tool to use for sharing music and photo files or backup of network PC’s and/or file servers. Model 065-1520 Signamax USB NAS PART NO.
C ETHERNET SWITCHES SFP Fiber Modules The 065-77SM is a high performance and cost-effective module for serial optical data communication applications specified for single-mode of 1.25 Gbps. It operates with + 3.3V power supply. The module is intended for single-mode fiber, operates at a nominal wavelength of 1,310 nm and complies with Multi-source Agreement (MSA) Small Form Factor Pluggable (SFP).
C ETHERNET SWITCHES 10 Gbps Modules 10 Gbps XENPAK transceiver module 065-10GMM is a hot pluggable module in the Z-direction that is usable in typical router line card applications, Storage, IP network and LAN and compliant to XENPAK MSA. The maximum transmission length of 065-10GMM is defined from 26m to 300m, depending on Multi Mode fiber types. The 065-10GMM is a fully integrated 10.
NETWORK CONNECTIVITY SYSTEMS
Network Interface Cards D Gigabit Ethernet PCI Adapter Cards Fast Ethernet PCI Adapter Cards
D NETWORK INTERFACE CARDS Gigabit Ethernet PCI Adapter Card Signamax Connectivity Systems’ Gigabit network adapter cards are used wherever it is necessary to provide Gigabit Ethernet capability directly into a server or workstation. These cards utilize the new high-speed 64/32-bit PCI Bus Mastering architecture and support IEEE 802.1p Quality of Service (QoS) and 802.1Q VLAN Tagging standards for complete network optimization. The model 098-1122 twisted-pair LAN card supports the IEEE 802.
D NETWORK INTERFACE CARDS Fast Ethernet PCI Adapter Cards 098-1111, the most cost-effective solution for end users, is equipped with Auto-negotiation function. Auto-negotiation function has become the basic requirement of network adapters. It automatically supports data transmission speeds ranging from 10 Mbps to 200 Mbps. This function smoothly and automatically switches drivers between 10 Mbps and 100 Mbps, Full- or Half-duplex, LAN connections.
NETWORK CONNECTIVITY SYSTEMS
KVM Switches E 2-Port USB KVM Switch 4-Port Slim Desktop Switch 8- and 16-Port Rackmount KVM Switches KVM Hydra Cables VGA Splitter
E KVM SWITCHES 2-Port USB KVM Switch The 098-8026 Slim Palmtop USB KVM Switch is a 2-Port compact KVM Switch with Audio and Mic switching function. Its USB support on the console side allows you to use USB keyboard and mouse. It comes with 2 sets of detachable USB KVM combo cables & 2 sets of Audio/Mic cables for SOHO and office desktop multimedia application.
E KVM SWITCHES 4-Port Slim Desktop Switch 4-Port Slim Desktop PS/2 KVM Switch with Audio&Mic for SOHO and office multimedia applications. The 098-8040 Slim Desktop PS/2 KVM Switch provides Audio and Microphone switching function for SOHO and office desktop multimedia application. And it allows you to access, control, boot and reboot four PS/2-enabled multimedia computers using only one keyboard, video, mouse and optional speaker set and microphone.
E KVM SWITCHES 8- and 16-Port Rackmount KVM Switches The 098-8280/098-82160 are 8- and 16-Port cascadable 19" Rackmount KVM Switches with OSD. They are designed to provide robust and reliable KVM switching performance under harsh and critical environment either in corporate office or on industrial floor. OSD Menu offers more intuitive and convenient control. The full-feature OSD gives an intuitive menu-driven operation most users will find dispensable for a truly convenient experience.
E KVM SWITCHES SPECIFICATIONS Model 098-8280 PC Ports: 8 Console Port: 1 Daisy-chain port: 1 Daisy-chain level: Up to 16 levels Max.
E KVM SWITCHES KVM Hydra Cables Tangle-proof, single-cable design combines monitor, keyboard and mouse cables into a single, flexible bundle. Available in two types and in a variety of lengths for connection between CommandView KVM switches and your computers, and also as an extension between your monitor, keyboard, and mouse to the CommandView KVM switch. Model 098-A018 Model 098-A050 098-A100 KVM Hydra cables E5 PART NO. DESCRIPTION 098-A015 KVM cable for 1.
E KVM SWITCHES VGA Splitter Signamax Video Splitter is a VGA/SVGA/QXGA splitting device which boosts video signal from one PC to 2/4/8 monitors. Its built-in 300 Mhz Video Amplifier not only extends the transmission distance up to 210 ft (65 m) but also gains multiple high quality screens. It is very suitable for multiple display applications, such as Stock market monitor array, Educational demos, Airport & Railway station bulletin display. VGA Splitter PART NO.
NETWORK CONNECTIVITY SYSTEMS
Wireless LAN Wireless Access Point 802.11b/g Wireless AP/Router 802.11b/g F Wireless PCI Card 802.11b Wireless PCI Card 802.11b/g Wireless PCMCIA Card 802.11b/g Wireless USB Dongle 802.11b/g Wireless AP/Router 802.11a/b/g Wireless Access Point 802.11a/b/g Wireless Outdoor Access Point 802.11a/b/g Wireless PCI Card 802.11a/b/g Wireless PCMCIA Card 802.11a/b/g Wireless USB Dongle 802.11a/b/g Wireless Mini PCI Card 802.11a/b/g Wireless AP/Router 802.11b/g/n Wireless MIMO Client Adapters 802.
F WIRELESS LAN Wireless Access Point 802.11b/g Signamax 802.11g Access Points are the ideal solution for any network administrator who needs to expand the capacity of the wireless network. This is especially applicable to wireless networks in high traffic areas such as airports, coffee shops, shopping centers, sporting venues, and university campus deployments. At transfer rates of up to 54 Mbps. In addition to bridging 802.
F WIRELESS LAN Wireless AP/Router 802.11b/g Signamax Wireless AP Router 065-1788, IEEE802.11b/g standard compliant, is a high quality and reliable Internet routing and security device, enables multiple users to share the Broadband Internet connection with or without wires through a Cable or DSL modem. Simply install the router, connect to Cable/DSL modem, and surf Internet without extra efforts.
F WIRELESS LAN Wireless PCI Card 802.11b Signamax 065-1796 let you connect your desktop computer to a wireless network, and is suitable for small offices, home offices and places where cable can not be installed. PCI card complies with 802.11b in 2,4 GHz frequency band. Users connected will enjoy faster downloads and truly instant email communication at transfer rates of up to 11 Mbps. For more secure communication, the 065-1796 support the encryption settings up to 64/128-bit WEP and MAC address filter.
F WIRELESS LAN Wireless PCI Card 802.11b/g Signamax 065-1798 let you connect your desktop computer to a wireless network, and is suitable for small offices, home offices and places where cable can not be installed. PCI card complies with 802.11b/g in 2,4 GHz frequency band. Users connected will enjoy faster downloads and truly instant email communication at transfer rates of up to 54 Mbps. It provides superior performance and interoperability within mixed mode network.
F WIRELESS LAN Wireless PCMCIA Card 802.11b/g Signamax 065-1791 let you connect your laptop computer to a wireless network, and is suitable for small offices, home offices and places where cable can not be installed. PCMCIA card complies with 802.11b/g in 2,4 GHz frequency band. Users connected will enjoy faster downloads and truly instant email communication at transfer rates of up to 54 Mbps. It provides superior performance and interoperability within mixed mode network.
F WIRELESS LAN Wireless USB Dongle 802.11b/g Signamax 065-1791A let you connect your laptop computer to a wireless network, and is suitable for small offices, home offices and places where cable can not be installed. USB Dongle complies with 802.11b/g in 2,4 GHz frequency band. Users connected will enjoy faster downloads and truly instant email communication at transfer rates of up to 54 Mbps. It provides superior performance and interoperability within mixed mode network.
F WIRELESS LAN Wireless AP/Router 802.11a/b/g 065-1756 Wireless 802.11a/b/g AP/Router is a complete all-in-one networking solution for homes and small/medium enterprises. With its built-in 4x 10/100 Mbps auto-sensing Ethernet switch ports, users can link multiple computers to Internet without any hassle. The built-in wireless function can let you connect wirelessly with your desktop or notebook computers from up to 300 meters away, and simultaneously in wireless A and G.
F WIRELESS LAN Wireless Access Point 802.11a/b/g Signamax 065-1755 Wireless 11a/b/g Dual-Band Access Point can be accessed in all three 802.11 wireless networks. 065-1755 contains two separate wireless connectivity radio transceivers, which support all three popular wireless networking specifications. One of the two transceivers uses 2.4 GHz frequency band and supports both wireless 802.11b and 802.11g, which offers up to 11 Mbps and 108 Mbps data rate respectively.
F WIRELESS LAN Wireless Outdoor Access Point 802.11a/b/g Signamax 065-1761 Wireless 11a+g Dual-Band Outdoor Access Point w. Integrated 20dBi Outdoor Flat Antenna can be accessed in all three 802.11 wireless networks. 065-1761 contains two separate wireless connectivity radio transceivers, which support all three popular wireless networking specifications. One of the two transceivers uses 2.4 GHz frequency band and supports both Model 065-1761 wireless 802.11b and 802.
F WIRELESS LAN Wireless PCI Card 802.11a/b/g Signamax 065-1750 Wireless 11a/b/g PCI Adapter offers high-speed wireless connection with a data rate up to 108 Mbps. 065-1750 supports seamless roaming from cell to cell in all types of wireless networks. You can place your desktop computers anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Wireless PCMCIA Card 802.11a/b/g The 065-1751 Wireless 11a/b/g CardBus Adapter offers high-speed wireless connection with a data rate up to 108 Mbps. It can provide the speed you need for large file download, digital video and audio transmissions. 065-1751 supports seamless roaming from cell to cell in all types of wireless networks. You can place your notebook anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Wireless USB Dongle 802.11a/b/g The 065-1752 Wireless 11a/b/g USB Dongle offers high-speed wireless connection with a data rate up to 54 Mbps. It can provides the speed you need for large file download, digital video and audio transmissions. 065-1752 supports seamless roaming from cell to cell in all types of wireless networks. You can place your desktop computers anywhere at home or in the office building without any wire limitation.
F WIRELESS LAN Wireless Mini PCI Card 802.11a/b/g The 065-1753 Wireless mini PCI card compatible with 802.11a/b/g offers high-speed wireless connection with a data rate up to 108 Mbps. It can provide the speed you need for large file download, digital video and audio transmissions. 065-1753 supports seamless roaming from cell to cell in all types of wireless networks. You can insert this card anywhere to different router boards supporting Atheros chipsets.
F WIRELESS LAN Wireless AP/Router 802.11b/g/n Signamax 065-1710 complies with 802.11n draft 2.0 wireless standard in 2,4 GHz frequency band. Utilizing the advanced MIMO technology, it can support the data transmission rate of up to 300 Mbps and the coverage distance is far than IEEE 802.11b/g products. Stable wireless connection and high bandwidth enable you to enjoy the network applications without any interruption.
F WIRELESS LAN Wireless MIMO Client Adapters 802.11b/g/n Signamax 065-1711/12/13 complies with 802.11n draft 2.0 wireless standard in 2,4 GHz frequency band. Utilizing the advanced MIMO technology, it can support the data transmission rate of up to 300 Mbps and the coverage distance is far than IEEE 802.11b/g products. Stable wireless connection and high bandwidth enable you to enjoy the network applications without any interruption.
F WIRELESS LAN Model 065-2408 Antennas for 2.45 GHz Band Model 065-2412 Model 065-2411 Signamax Antennas for 2.45 GHz Band PART NO. DESCRIPTION CONNECTOR 065-2408 OMNI-8.5 Omnidirectional antenna, Gain 8,5 dBi, to be used in ISM band – 2.4 GHz, vertical HPBW, V25° N female 065-2411 UNI-11 Unidirectional antenna, Gain 11,5 dBi, to be used in ISM band – 2.4 GHz, HPBW – H80°, V30° SMA female 065-2412 OMNI-12 Omnidirectional antenna, Gain 12 dBi, to be used in ISM band – 2.
F WIRELESS LAN Antennas for 5 GHz The Signamax Antennas are designed by Signamax for the 5 GHz communication system. After structure optimized and being tuned carefully, it has excelent performance such as very good VSWR, high gain nad big F/B Ratio etc. The strong structure and small dimension make it easy to install. Each antenna is tested by HP network analyzer strictly before delivery. Model 065-5020 Model 065-5020 Antennas for 5 GHz communication system PART NO. DESCRIPTION Antennas for 5.
F WIRELESS LAN SPECIFICATIONS 065-5020 Frequency Range: 5,150 – 5,875 MHz Gain: 20 dBi Vertical Beamwidth: 16° Horizontal Beamwidth: 16° VSWR: <1.5 Nominal Impedance: 50 Ω Polarization: Vertical / Horizontal Max Power: 100W Dimension: 190 x 216 x 50 mm Weight: 1.1 kg Connector: N female Rated Wind Velocity: 60 m/s 065-5808 Frequency Range: 5,725 – 5,875 MHz Gain: 8 dBi Vertical Beamwidth: 16° Horizontal Beamwidth: 360° VSWR: <1.
NETWORK CONNECTIVITY SYSTEMS
Structured Cabling G Introduction to Structured Cabling What is Structured Cabling? Structured Cabling Testing 10GBaseT and Structured Cabling
G STRUCTURED CABLING Introduction to Structured Cabling History Until the beginning of the 1980’s, the majority of computer networks worked in the host/terminal mode. Applications as well as data were stored centrally on a host computer and user stations, so-called terminals, handled them in this centralized way. Considering the text character of this type of communication, it was not necessary to build special high capacity transmission paths in terminal networks.
G STRUCTURED CABLING Introduction to Structured Cabling Currently existing categories Category 3—this is the first and thus oldest category in structured cabling. In the beginning, Category 3 components were used for both voice and data transmissions. The bandwidth was defined up to 16 MHz with data rates of 10 Mbps. Today, Category 3 is predominantly used only for telephone distribution systems (e.g. connection from ISDN patch panels to telephone PBX board, telephone equipment cords etc).
G STRUCTURED CABLING Introduction to Structured Cabling In the ISO/IEC 11801 generic cabling standard document, further copper cabling distinctions referred to as “Classes” were introduced. Classes are used for classifying the permanent link or channel performance rather than for rating the individual structured cabling components. The brief description of all classes as specified in the ISO/IEC standard is the following: Class A – analogue voice telephony with the bandwidth of up to 10 KHz.
G STRUCTURED CABLING Structured Cabling Testing Testing has a major significance for the correct functionality of structured cabling. Testing devices are able to measure installed components and determine whether all requirements defined in the international standards necessary for reliable operation have been met.
G STRUCTURED CABLING Structured Cabling Testing ACR (Attenuation to Crosstalk Ratio) ACR is a theoretical parameter (i.e. it is not measured but is deduced from two previously measured values) which shows the margin between the NEXT and attenuation values: ACR [dB] = NEXT [dB] - A [dB]. If the level of attenuation meets or approaches the level of near end cross-talk, the transmitted signal will be lost. The interval between NEXT and attenuation must be at least 10 dB.
G STRUCTURED CABLING Structured Cabling Testing Length There is a direct proportionality between the length and attenuation (i.e. the longer the length of cable, the higher the attenuation). Testing devices use so-called TDR (Time Domain Reflectometery) for measuring lengths. This means that a pulse is sent down the cable, then it is reflected back onto the remote unit, and subsequently the time during which the pulse travels the whole track is recorded. Based on the NVP (i.e.
G STRUCTURED CABLING 10GBaseT and Structured Cabling Gigabit Ethernet was, until recently, considered to be the limit that would be very difficult to overcome on metallic structured cabling. Now it is obvious that 1 Gbps will not be the maximum transmission rate that can be achieved on copper twisted pair cables. The new 10GBaseT Ethernet standard that was published in June 2006 by the IEEE 802.3an group proves this.
G STRUCTURED CABLING Signamax Category 7 shielded cable parameters (at temperature of 20°C). The cable supports 10GBaseT. See page K1 for more. f (MHz) Attenuation (dB/100 m) NEXT (dB) PS-NEXT (dB) ACR (dB/100 m) PS-ACR (dB/100 m) ELFEXT (dB/100 m) PS-ELFEXT (dB/100 m) Return loss (dB) 1 1.8 100 97 98 95 105 105 – 4 3.4 100 97 97 94 105 102 27 10 5.4 100 97 95 92 97 94 30 16 6.8 100 97 93 90 93 90 30 20 7.7 100 97 92 89 91 88 30 31.2 9.
NETWORK CONNECTIVITY SYSTEMS
Work Area Outlet Systems H Category 6 Wall Outlets Category 5E Wall Outlets Category 6A Keystone Jacks Category 6 Keystone Jacks Category 5E Keystone Jacks Keystone Jack Modular Outlets Keystone Multimedia Modules
H WORK AREA Category 6 Wall Outlets Signamax Category 6 outlets are designed for an easy installation. This is ensured by strain relief providing cable positioning and screening contact between the shielded cable and metallic outlet housing. The outlet has a slim design and excellent EMC performance. The modular construction of the outlet allows flush mounting or wall mounting installation using universal back box.
H WORK AREA Category 5E Wall Outlets For Signamax Category 5 Enhanced outlet its high transmission parameters is the key attribute. Two angled RJ45 ports are covered by plastic frame that fits trunking systems using 80 x 80 mm modules. Outlet has an excellent EMC performance and is developed for all demanding markets. Modular construction of the outlet allows flush mount or wall mount installation using universal back box.
H WORK AREA Category 6A Keystone Jacks Signamax 10G shielded Category 6A keystone jacks have been designed to meet the need for high-bandwidth applications, such as 10GBaseT. These components have very slim profile and thus can fit in all highest density applications. They are engineered to exceed the 10G/Category 6A permanent link as well as channel level requirements and are fully tested up to 500 MHz.
H WORK AREA Category 6 Keystone Jacks Signamax Connectivity Systems Category 6 Keystone Jacks have been designed to meet the need for high-bandwidth applications. Category 6 connectors are slim in profile for the highest density applications, and are engineered to exceed all TIA/EIA-568-B.2-1 Category 6 permanent link and channel level requirements. Category 6 jacks are fully tested to 250 MHz.
H WORK AREA Category 5E Keystone Jacks Category 5E Keystone Jacks exceed permanent link and channel level requirements as defined in TIA/EIA-568-B.2 and are fully tested to 155 MHz. Provide a sound platform for supporting all today's network operating systems including Gigabit Ethernet. Category 5E jacks can be terminated with industry standard 110 or Krone termination tools and feature color-coding for both T568A and T568B wiring.
H WORK AREA Keystone Jack Modular Outlets Modular outlets from Signamax are dedicated to be user-friendly solution for customers who need high modularity in reasonable quality. Contains wide range of outlets and frames, each usable for all keystone jacks, modular jacks and faceplates from our portfolio. KJGM – back KJGM Keystone Jack Modular Outlets PART NO.
NETWORK CONNECTIVITY SYSTEMS
Patch Panels I Unloaded Shielded Patch Panel for 10G Category 6 Shielded Patch Panels Category 6 Unshielded Patch Panels Category 5E Shielded Patch Panels Category 5E Unshielded Patch Panels ISDN Patch Panels
I PATCH PANELS Unloaded Shielded Patch Panel for 10G Signamax shielded unloaded patch panel is designed to be used with the Signamax 10G shielded Category 6A keystone jacks (i.e. KJS458-10G) and therefore is an important part of the Signamax 10G high-performance solution. The panel can be loaded with 24 keystones and is equipped with a cable management bar to secure the cables and ensure proper and stable connection. The colour of the Signamax shielded unloaded patch panel is black and its height is 1U.
I PATCH PANELS Category 6 Shielded Patch Panels Signamax shielded Category 6 patch panel is designed to be used with other Category 6 components as part of complete high-performance solution. The panel meets all electrical parameters specified in the TIA/EIA 568-B.2-1, ISO/IEC 11801:2002 and EN 50173-1 standards. It supports both T568A and T568B wiring configurations using an easy to read color-coded wiring label. Each port of the Signamax Category 6 panel is sequentially numbered for easy administration.
I PATCH PANELS Category 6 Unshielded Patch Panels Signamax Category 6 unshielded patch panels are designed to exceed TIA/EIA-568-B.2-1, ISO/IEC 11801:2002 and EN 50173-1 performance specifications providing usable bandwidth beyond 250 MHz. These high-density panels are available in 12- through 48-Port versions and feature enhanced front and rear labeling for easy circuit identification.
I PATCH PANELS Category 5E Shielded Patch Panels Signamax Category 5E shielded patch panel is designed to exceed TIA/EIA-568-B.2, ISO/IEC 11801:2002 and EN 50173-1 performance specifications providing usable bandwidth beyond 155 MHz. This panel is available in 24-Port version and features enhanced front and rear labeling for easy circuit identification. The panel supports both T568A and T568B wiring configurations using an easy to read color-coded wiring label.
I PATCH PANELS Category 5E Unshielded Patch Panels Signamax Category 5E unshielded patch panels have been engineered for high-performance, high-density, and ease of installation. These panels exceed both component and channel performance as specified in TIA/EIA-568-B.2, ISO 11801:2002 and EN 50173-1, and include new features for port labeling, colour-coding and cable management.
I PATCH PANELS ISDN Patch Panels Signamax ISDN Category 3 patch panel is a high-density telecommunication panel with 25 and 50 standard RJ45 jacks. The panel meets all latest standards and electrical parameters and is designed for termination of two pair cable in Krone termination blocks. Printed circuit board together with high quality components ensures the Category 3 performance. Integrated back cable management for separate cables provides organized and secure installation. All ports are numbered.
NETWORK CONNECTIVITY SYSTEMS
Patch Cords/Testers J S-FTP Category 6A Patch Cords S-FTP Category 6 Patch Cords S-FTP Category 5E Patch Cords UTP Category 6 Patch Cords UTP Category 5E Patch Cords T-Adapters and Testers Inline Couplers and Connection Boxes
J PATCH CORDS S-FTP Category 6A Patch Cords Signamax shielded 10G Category 6A patch cables with high quality RJ45 connectors are assembled by using AWG 26 individually shielded pairs PiMF patch cable. The high quality plugs are plated by gold over nickel on polished bronze for up to 2,500 plug cycles. The Category 6A halogen-free patch cables are available in 1m, 2m, 3m, 5m and 10m lengths.
J PATCH CORDS S-FTP Category 5E Patch Cords Signamax shielded Category 5 Enhanced patch cables are assembled using high quality 26 AWG double shielded patch cable. Protection provided by molded boots prevents pair-to-pair disturbance inside the body of the connector and increases performance of the patch cable. C5E-315GY S-FTP Category 5E Patch Cords LENGTH GREY GREEN BLUE RED YELLOW 0.5 m C5E-315GY-0.5 MB C5E-315GR-0.5 MB C5E-315BU-0.5 MB C5E-315RD-0.5 MB C5E-315YE-0.
J PATCH CORDS UTP Category 5E Patch Cords Signamax unshielded Category 5 Enhanced patch cables with high quality connector are assembled using high quality 26 AWG patch cable. High quality plugs are plated by gold over nickel on polished bronze for up to 2,500 plug cycles. Protection provided by molded boots prevents pair-to-pair disturbance inside the body of the connector and increases performance of the patch cable.
J PATCH CORDS T-Adapters and Testers When installing a cabling system, checking for open or short circuits is always a requirement. Signamax remote cable testers answer the need for testing T568A, T568B, 10BaseT, 10Base2, 10Base5 and Token Ring systems, for UTP and STP cabling.
NETWORK CONNECTIVITY SYSTEMS
Installation Cable K S-STP Category 7 Installation Cable Certificates 10GBaseT FTP Category 6 Installation Cable UTP Category 6 Installation Cable UTP Category 5E Installation Cable FTP Category 5E Installation Cable
K INSTALLATION CABLE S-STP Category 7 Installation Cable Signamax Category 7 shielded installation cable complies with the most stringent parameters with significant headroom for installation safety. Selected design goes hand-in-hand with the best quality which, with strictly controlled production, guarantees the highest performance. The shielded Category 7 installation cable is produced in S-STP configuration (PimF—Pair in metal foil) and is tested up to 900 MHz.
K INSTALLATION CABLE Certificates 10GBaseT Signamax Permanent Link Certificate Signamax Channel Certificate TM www.signamax.
K INSTALLATION CABLE FTP Category 6 Installation Cable Signamax Category 6 shielded installation cable BC6-4S is a high-performace data cable that is designed to meet the demands of today's most advanced voice and data networks. Category 6 cables support 1000Base-T/TX protocols for data rates up to 1 Gb/s and exceed the requirements of ANSI/TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1:2002 standards.
K INSTALLATION CABLE UTP Category 6 Installation Cable Signamax Category 6 unshielded installation cable is designed to provide the highest level of transmission performance to meet the needs of today's most advanced voice and data networks. Category 6 cables support 10Base-T through 1000Base-T/TX protocols for data rates up to 1 Gb/s and exceed the requirements of TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1 standards.
K INSTALLATION CABLE UTP Category 5E Installation Cable The Category 5E unshielded installation cable is mostly used cable for data transmission where no electromagnetic disturbance is a problem. Supplied as part of complete Signamax Category 5E solution, the cable represents one of the key elements for safety and economical data transfer. Sophisticated cable design ensures very low electromagnetic emitency and low crosstalk. All parameters exceed requirements specified by TIA/EIA 568-B.
K INSTALLATION CABLE FTP Category 5E Installation Cable The Category 5E shielded installation cable is mostly used cable for data transmission where electromagnetic disturbance is a problem. Supplied as part of complete Signamax Category 5E solution, the cable represents one of the key elements for safety and economical data transfer. Sophisticated cable design ensures very low electromagnetic emitency and low crosstalk. All parameters exceed requirements specified by TIA/EIA 568-B.
NETWORK CONNECTIVITY SYSTEMS
Fiber Optic Systems L Fiber Optic Patch Cords Fiber Optic Adapters Fiber Optic Patch Panels Wall Mount Fiber Optic Box
L FIBER OPTICS Fiber Optic Patch Cords Fiber optic patch cords are suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-2, ISO 11801:2002 and EN 50173-1 standards. ST/ST, SC/SC and hybrid ST/SC Patch Cords are available in both multimode (62.5/125 μm and 50/125 μm) and singlemode cable-types, in duplex and simplex versions.
L FIBER OPTICS Fiber Optic Patch Cords Signamax MTRJ and LC fiber optic patch cords suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-3, ISO 11801:2002 and EN 50173-1 standards. MTRJ/MTRJ, LC/LC and hybrid MTRJ and LC to ST and SC multimode (62.5/125 μm and 50/125 μm) patch cords are available.
L FIBER OPTICS Fiber Optic Adapters SIGNAMAX Premise Connectivity System Fiber optic connectors are offered in wide range of types. All standard shapes are offered in both multimode and singlemode construction. Signamax offers a wide variety of fiber optic adapters including ST, SC, LC and MTRJ. Our ST and SC adapters are available with a phosphor bronze sleeve for universal applications (MM/SM). All SC, LC and MTRJ adapters are provided with retaining clips for easy, snap-in mounting.
L FIBER OPTICS Fiber Optic Patch Panels Signamax 19" Rack mountable fiber optic patch panel is designed for direct fiber optic cables termination. Standard size is 1U. The patch panel is modular and contains two parts—body and faceplate for several adapter types and count. Panel has fully metal massive construction for usage in critical environments and can be easily pulled out with no need to be dismantled from the rack.
NETWORK CONNECTIVITY SYSTEMS
Data Racks 19" Data Racks M 19" Server Racks 19" Wall Mounted Racks 19" Mounted Rack Signamax 19" Assembled Data Racks 19" Fan Units 19" Shelves Diode Lighting Unit Accessories
M DATA RACKS 19" Data Racks Attractive design and high quality are hallmarks of these data racks. Their basic framework is welded metal plate, multiple-bent for the strength and rigidity necessary for heavier equipment. All profile moldings are flexible and adjustable. Vent slots in the upper or lower cabinetry allow airflow for efficient cooling. The door is made of safety glass, and can be mounted for either left or right-hand opening on either the front or rear of the data rack.
M DATA RACKS 19" Data Racks PART NO.
M DATA RACKS 19" Server Racks Signamax 19" Server Racks are especially suitable for server instalation, but all other 19" components and accessories can be installed as well. Back of the rack is perforated and allows higer air flow. All other attributes are identical with regular Signamax 19" Data Racks (see page M1). 19" Server Racks M3 PART NO.
M DATA RACKS 19" Wall Mounted Racks Vent slots in the upper and lower part of the Signamax Wall Mounted Data Rack allow sufficient airflow inside. Can be mounted upside-down, enabling the door to be opened from the left or right. Wall section can be directly hinged on the wall or by means of a fixed frame. Front door is made of safety glass. The rack is lockable. Center section lock system can be unlocked separately. 19" Wall Mounted Racks – not divided PART NO.
M DATA RACKS 19" Assembled Data Rack The Signamax Assembled Rack is suitable for installation of structured cabling components—e.g. patch panels, active equipment and telecommunication cabling components. The design of the rack is accommodated to fit most computing and data centers. Rack Description This 19" Assembled Data Rack consists of assembled skeleton. The front side door is mounted using three hinges and secured by 1-point lock. The safety glass used in the door assembly provides high safety.
M DATA RACKS Table of standard Rack dimensions PART NO.
M DATA RACKS 19" Fan Units Signamax 19" Fan Units are constructed to fit into all Signamax 19" Data Racks, to provide forced airflow inside. Fits in lower as well as in the upper part of the rack. Standard and recommended installation is in the lower part of the rack to ensure a proper “chimney-effect”, which supplies the rack with fresh air. Fan units allow airflow of up to 160 m3/hour. All fan units are equipped with a thermostat to regulate the airflow for temperatures in the range of 0° to 60°C.
M DATA RACKS 19" Shelves Signamax shelves for keyboard, documentation and LCD monitor are designed for the installation into the 19" data rack profiles. Shelves with lockable drawers for safe stowage of service documentation and shelves with an integrated computer keyboard and monitor occupy the space of 1U. This gives you more room in the data rack. Documentation shelf opened Keyboard and documentation shelves PART NO.
M DATA RACKS 19" Shelves Signamax 19" shelves are convenient for equipment not designed for 19" installations. Our product range includes shelves for fixed and drawer-style installations. Drawer-style system enables easier access to the equipment being used. Ventilated bottom assures cooling airflow to the equipment. Shelf supports and mounting brackets are included. Fixed shelves are available in depths from 150 mm to 550 mm. Sliding shelves are available in depths from 250 mm to 450 mm.
M DATA RACKS 19" Diode Lighting Unit The 19" diode lighting unit is constructed as a compact fixture designed for installation into 19" distribution board frames for illumination of equipment installed within distribution board. The ON/OFF pushbutton and the LED-signaling that indicates On/Off state are located on the face of the unit. The rear side is equipped with a socket for power feed. The underside of the unit is fitted with the line of LED—i.e. the light is directed downwards.
M DATA RACKS Accessories These base frames are suitable for all Signamax data racks and are used for fixing the rack to the floor to assure stability. Cable inlets placed on each side of the base are covered by a filter grid. Filter grid can be removed to insert cables inside. Adjustable feet for 19" Data racks are to compensate for uneven floors and to assure high stability. REC-RB-66BF REC-CB Blanking panels PART NO.
M DATA RACKS EPCM1-4/8 Accessories Ring brackets are used for organizing cables inside of the enclosure. Cables are organized by vertical or horizontal organizer brackets. Two mounting sets allow multiple placement possibilities within the data rack. Metal brackets have a polished surface texture. 19" cable organizer with 5 plastic rings and side protection is designed for easy and fast management of patch cords and other cables. EPCM2-4/8 EPCM3-4/8 EPCM4-4/8 Cable Management Ring Brackets PART NO.
NOTES Notes NETWORK CONNECTIVITY SYSTEMS www.signamax.
References ABB elektro Zilina (Slovakia) Adelphia Cable (USA) Air Jamaica (USA) Augusta National Golf Club (USA) AVEX Oravska Lesna (Slovakia) Axton (Slovakia) Bayern Chemie (Germany) Bechtel Corporation (USA) CASINO Austria (Austria) Catholic University (Slovakia) CCR-Princeton (USA) CEZ (Czech republic) Comcast Cable (USA) Constantin University (Slovakia) Depository Trust (USA) eBanka (Czech republic) Federal Bureau of Investigation (USA) Federal Reserve Bank (USA) Florida Department of Transportation (US
YOUR DISTRIBUTOR © Copyright by ASPRA a.s. and Pavlina Kralova, cover designed by MARCO. Any copying of this document without the author‘s consent is not allowed.
