User`s manual
Signamax
™
065-7840C-WS 24-Port 10/100/1000BaseT/TX WebSmart Switch
Publication date: June, 2011
Revision 1.0
73
4-2-9. IGMP Snooping
Function name:
IGMP Snooping Configuration
Function description:
IGMP Snooping lets administrators configure a switch to constrain multicast
traffic by listening to Internet Group Management Protocol (IGMP). After finishing
the settings, please press the <Apply> button to start up the function.
Parameter description:
IGMP Enabled:
Just tick the check box (
) to enable this function.
Default: disable
Router Ports:
Just tick the check box (
) beside the port x to enable router ports, then
press the <Apply> button to start up.
Default: none
Unregistered IGMP Flooding enabled:
Just tick the check box (
) to enable this function.
Default: enable
VLAN ID:
At the IGMP Enable mode being selected, it will list the VLAN ID number.
IGMP Snooping Enabled:
After IGMP Enabled function starts up, the user can tick the check box (
) to
enable this function.
Default: enable
IGMP Querying Enabled:
After IGMP Enabled function starts up, the user can tick the check box (
) to
enable this function.
Default: enable
Fig. 4-19 IGMP Configuration