User`s manual

Signamax

™

065-7840C-WS 24-Port 10/100/1000BaseT/TX WebSmart Switch

Publication date: June, 2011

Revision 1.0

4-2-4. VLAN Group Configuration

Function name:

VLAN Group Configuration

Function description:

This function shows the information of VLAN Groups, and allows

administrators to maintain them by modifying and deleting each VLAN group.

User also can add a new VLAN group by inputting a new VLAN name and

VLAN ID.

If you are in a port-based VLAN, it will just show the ID、Member of the

existing port-based VLAN group. If you are in a tag-based VLAN, it will show

the ID、VID、Member of the existing tag-based VLAN group. The switch can

store the configuration of port-based VLAN and tag-based VLAN separately.

When you choose a VLAN mode, the switch will bring you the responded

VLAN configuration which keeps the default data. You can easily create and

delete a VLAN group by pressing the <Add> and <Delete> function buttons,

or click the Group ID directly to edit it.

Fig. 4-7 Port-Based VLAN Configuration

Parameter description:

ID (Group ID):

When you want to edit a VLAN group, you must select the Group ID field.

Then, you will enter Tag Base VLAN Group Setting or Port Base VLAN

Group Setting page, which depends upon your VLAN mode selection.

VID:

VLAN identifier. Each tag-based VLAN group has a unique VID. It

appears only in tag-based mode.

Member:

In the modify function, this is used to enable or disable if a port is a

member of the new added VLAN, “Enable” means it is a member of the