User manual

065-7940B-WS 24-Port 10/100/1000 WebSmart Switch with 4 SFP Ports
6
Key Features
 24 (twenty-four) 10/100/1000Mbps Gigabit Ethernet ports.
 4 (four) SFP slots for optional fiber connection.
 Supports auto-detection for SFP module insertion
 Auto-discovery function for easy Network management.
 8K MAC address entries and 24 groups VLAN table
 Supports Port Mirroring.
 Supports up to 8 ports and 12 groups port aggregation.
 Supports QoS: port-based, tag-based, DSCP priority
 Supports full-duplex flow control and half-duplex backpressure
 Supports Rate Limit (ICMP Rate, Broadcast Rate, Multicast Rate, and
Ingress/Egress Rate)
 Supports Jumbo frame 9K bytes
 Supports 500K bytes buffer Memory
 Supports Web-based management interface.
 Non-blocking wire-speed switching performance
 Supports firmware upgrade, SNMP
 FCC Class A, CE, VCCI. RoHS-compliant
The Front Panel
The front panel features all the LED indicators and ports:
Device LED:
LED Status Operation
Steady Green The switch is powered on
Power (PWR)
Off The switch is powered off
Port LEDs:
LED Status Operation
Green The port is connected at 1000 Mbps
Blinking Green
A valid link is established, and there is data being
transmitted/received.
1000M
Off
No valid link on this port or the Port is connected at 10/100
Mbps
Steady Green
A valid link is established, and there is no data being
transmitted/received.
Blinking Green
A valid link is established, and there is data being
transmitted/received.
10/100M
Off
No valid link on this port or the port is connected at 1000
Mbps