User manual

065-7940B-WS 24-Port 10/100/1000 WebSmart Switch with 4 SFP Ports

Appendix- Command Line Interface

Start-up and Terminal configuration

To start the Command Line Interface, please connect a PC COM port to the

RS-232 connector and activate terminal emulation software (e.g. Windows’

HyperTerminal).

The terminal emulation software should be started in the following configuration:

1. Data rate: 115200 baud

2. Data format: 8 data bits, 1 stop bit and no parity

3. Flow control: none.

4. Click the property icon, select settings, and make sure that: The Function,

arrow, and ctrl keys act as: Terminal keys, Emulation: VT100

To get access to the CLI, you will have to get the username and password for login.

The default username and password are “admin” and “admin”.

Note: We recommend that you configure a new username and password to

prevent unauthorized users from accessing the device.