User manual

065-7940B-WS 24-Port 10/100/1000 WebSmart Switch with 4 SFP Ports
20
Tag-based QoS:
Tag-based QoS assigns packet priority according to the tags on the packets.
To configure Tag-based QoS:
1. Select “Tagged” in the “Mode” column for those ports that are going to
perform tag-based QoS. Click the “Apply” button.
2. Click the “Tag priority” button. The “Tag Priority Setting” page shows up.
3. Select the port that you are going to configure from the drop menu.
4. Set the priorities as high or low for each Priority Tag type.
5. Click the “Apply” button again to execute your configuration.