User manual

065-7940B-WS 24-Port 10/100/1000 WebSmart Switch with 4 SFP Ports
11
Management guide
Access the Switch
This section shows you how to access and use the Signamax 065-7940B-WS
Switch’s advanced management capability, which can be accessed via console
port or Internet Browser over the network (in-band).
Manage via Command Line Interface
To start the Command Line Interface, please connect a PC COM port to the
RS-232 connector and activate terminal emulation software (e.g. Windows’
HyperTerminal).
The terminal emulation software should be started in the following configuration:
1. Data rate: 115200 baud
2. Data format: 8 data bits, 1 stop bit and no parity
3. Flow control: none.
4. Click the property icon, select settings, and make sure that: The Function,
arrow, and ctrl keys act as: Terminal keys, Emulation: VT100
Note: To manage via command line interface, please find the “Appendix” for more
information
Manage via Web Browser
To access the Web-based management interface, you should configure the
management station with an IP address and subnet mask that is compatible with your
switch.
The factory defaults of the Switch:
IP：
：：
： 192.168.0.254
Subnet Mask：
：：
： 255.255.255.0
1. Run your Web Browser and enter the appropriate IP address in the Address field:
2. Key in the user name and password. The factory default value of User Name and
Password is “admin”.