User`s guide

Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch
59
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
This function shows the existing information of the VLAN Groups List and
maintains them, i.e. modify and delete one of them. The user also can add a
new VLAN group by inputting a new VLAN name and VLAN ID.
If you are in a port-based VLAN, it will just show the ID、Description、Member
of the existing port-based VLAN group. If you are in tag-based VLAN, it will
show the ID、Description、VID、Member of the existing tag-based VLAN
group. The switch cannot store the configuration of port-based VLANs and
tag-based VLANs separately. When you choose one of the VLAN modes, the
switch will bring you the responding VLAN configuration, which keeps the
default data. The user can easily create and delete a VLAN group by pressing
<Add Group> and <Delete Group> function buttons, or clicking the Group ID
directly to edit it.
Parameter description:
ID (Group ID):
To edit a VLAN group, the user must select the Group ID field. Then, the
user enters Tag Base VLAN Group Setting or Port Base VLAN Group
Setting page, depending on the desired VLAN mode selection.
Description:
The description defined by the administrator associated with a VLAN
group.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.
Member:
Used to enable or disable a port’s membership in the newly-added VLAN,
“Enable” establishes the port as a member of the VLAN. Just tick the
check box (
;) beside the port x to enable it.