User`s guide

Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch

For different network applications, the subnet mask may look like

255.255.255.240. This means it is a small network accommodating a maximum of

15 nodes in the network.

Default gateway:

For the routed packet, if the destination is not in the routing table, all the

traffic is put into the device with the designated IP address, known as the default

router. Basically, it is a routing policy. The gateway setting is used for Trap Events

Host only in the switch.

To assign an IP address to the switch, the administrator must check what the

IP address is of the network that will be connected with the switch. Use the same

network address and append your host address to it.

Fig. 2-9

First: IP Address: as shown in Fig. 2-9, enter “192.168.1.1”, for example. An

IP address such as 192.168.1.x must be set on your PC to communicate with the

switch.

Second: Subnet Mask: as shown in Fig. 2-9, enter “255.255.255.0”. Any

subnet mask such as 255.255.255.x is allowable in this case.