User`s guide

Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch

Fig. 2-7 the Login Screen for Web UI

2-1-4. IP Address Assignment

For IP address configuration, there are three parameters that need to be

filled in. They are the IP address, Subnet Mask, and the Default Gateway.

IP address:

The address of the network device in the network is used for internetworking

communication. Its address structure looks as shown in Fig. 2-8. It is “classful”

because it is split into predefined address classes or categories.

Each class has its own network range between the network identifier and

host identifier in the 32 bit address. Each IP address is comprised of two parts: the

network identifier (address) and the host identifier (address). The former indicates

the network where the addressed host resides, and the latter indicates the individual

host in the network which the address of the host refers to. The host identifier must

also be unique in the same LAN. The version of the IP address used in this switch is

version 4, known as IPv4.

Network identifier Host identifier

Fig. 2-8 IP address structure

32 bits