User`s guide

Signamax 065-7931 16-Port 10/100/1000BaseT/TX WebSmart Switch
99
Hardware Specifications
 Standard Compliance:
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.1p Priority (Quality of Service [QoS])
IEEE 802.1Q Tagged VLAN
IEEE 802.3x Flow Control
 Network Interface:
Configuration Mode Connector Port
10/100/1000 Mbps Gigabit TP
NWay TP (RJ-45)
1 - 16
1000Base-SX Gigabit Fiber
1000 FDX *SFP
15,16 (Optional)
1000Base-LX Gigabit Fiber
1000 FDX *SFP
15,16 (Optional)
1000Base-LX Single Fiber WDM (BiDi)
1000 FDX
*SFP
15,16 (Optional)
*Ports 15 & 16 are TP/SFP fiber dual media ports with auto-detection function
*Optional SFP module supports LC or BiDi LC transceiver

Transmission Mode: 10/100 Mbps supports full or half duplex
1000 Mbps supports full duplex only

Transmission Speed: 10/100/1000 Mbps for TP
1000 Mbps for Fiber
 Full Forwarding/Filtering Packet Rate:
Forwarding Rate Speed
1,488,000 pps 1000 Mbps
148,800 pps 100 Mbps
14,880 pps 10 Mbps
(pps = packets per second)

MAC Address and Self-learning: 8K MAC addresses
4K VLAN table entries

Buffer Memory: Embedded 400 KB frame buffer
 Flow Control: IEEE 802.3x compliant for full duplex
Backpressure flow control for half duplex
 Cable Type and Maximum Length:
TP
Cat. 5e or better UTP cable, up to 100 m
1000BaseSX
Up to 220/275/500/550 M,
which depends on Multimode Fiber type
1000BaseLX
Single-Mode Fiber, up to10/30/50 km
1000BaseLX WDM (BiDi)
Single-Mode Single Fiber, up to 20 km