Specifications

D
NETWORK
INTERFACE
CARDS
TM
www.signamax-eu.com
D2
PART NO. DESCRIPTION
098-1100FSCR 100BaseFX PCI Network Adapter Card – SC Multimode
098-1111 10/100 Mbps Fast Ethernet PCI adapter, RJ-45 STP
10/100 Mbps Fast Ethernet PCI Adapter
STANDARDS
IEEE 802.3u: 100BASE-TX
IEEE 802.3: 10BASE-T
BUS TYPE
PCI specification revision 2.1, 2.2
NETWORK INTERFACE
One shielded RJ45 phone-type jack
NETWORK MODES SUPPORTED
10BASE-T: CAT 3, 4, and 5 TP
100BASE-TX: CAT 5 TP cable
Full-duplex available in both modes
LEDs
LINK (Green), TX/RX (Green)
BOOT ROM (OPTIONAL)
64K Bytes with optional on-board
Boot ROM socket
DIMENSIONS
120 x 42 mm /4.72 x 1.65 inches)
ENVIRONMENT
Operating Temperature: 0° – 55°C
Storage Temperature: -20° – 70°C
Humidity: 10-90% Non-condensing
SOFTWARE SUPPORT
Windows 95/98/ME/ NT/2000/XP
Netware 3.x, 4.x, 5.x. Client 32,
NDIS 2.0 Drivers, Packet Driver, Linux,
SCO UNIX, Free BSD, DOS ODI
SPECIFICATIONS
098-1111, the most cost-effective solution for end users, is equipped with
Auto-negotiation function. Auto-negotiation function has become the basic
requirement of network adapters. It automatically supports data transmission
speeds ranging from 10 Mbps to 200 Mbps. This function smoothly and
automatically switches drivers between 10 Mbps and 100 Mbps, Full-or
Half-duplex, LAN connections.
Furthermore, an optional Boot ROM socket is provided to allow administrators
to boot diskless computers from remote servers. This function is most
frequently used for schools, libraries or other public buildings. 098-1111 runs
in 32-bit PCI bus master mode. It is compliant with industrial standards and its
drivers support all major operating systems.
10/100 Mbps Fast Ethernet PCI Adapter
FEATURES
• Sturdy Single Chip Design Enhances Reliability and Ensures
Robust Running Usability
• Auto-negotiation Automatically Switches between 10/100 Mbps
and Full-/Half-duplex Modes
• Equipped with one optional Boot ROM Socket to Boot Diskless
Computers Remotely
• Fully Comply with IEEE 802.3u and IEEE 802.3 Standards
• Support IEEE 802.3x Flow-control for Full-duplex
• Shielded RJ45 Connector Provides Unified 100BASE-TX and
10BASE-T Network Media Interface
• Comply with PCI specification 2.1, 2.2
• Support ACPI, and PCI-Bus Power Management
• Compliant to PC99 and PC2001 Standards
Model 098-1111
Model 098-1100FSCR
Model 098-1111