Specifications

D
D1
NETWORK
INTERFACE
CARDS
NETWORK CONNECTIVITY SYSTEMS
www.signamax-eu.com
PART NO. DESCRIPTION
098-1122 10/100/1000BaseT/TX PCI Network Adapter Card
Gigabit Ethernet PCI Adapter Card
STANDARD COMPLIANCE
IEEE 802.3 10BASE-T; IEEE 802.3u 100BASE-TX;
IEEE 802.3ab 1000BASE-T
ARCHITECTURE
PCI 2.1/2.2 (6/33 MHz) 32 bit & 64 bit
CONNECTOR
RJ-45
TRANSMISSION RATE
10/100/1,000 Mbps
TOPOLOGY
Star
PROTOCOL
CSMA/CD
NETWORK TRANSMISSION MEDIA
10BASE-T Cat. 3, 4, 5 UTP/STP
100BASE-TX Cat. 3, 4, 5 UTP/STP
1000ASE-TX Cat. 5, 6 UTP/STP
LED
100 Mb LINK/ACT, 1 Gb LINK/ACT
PHYSICAL CHARACTERISTICS
Power Consumption: 7 Watts (Max)
Weight: 0.095 kg
Operating Temperature: 0° – 55°C
Store Temperature: -20° – 70°C
Dimension: 122.2 x 42.9 mm
Humidity: 10-90% (Non-condensing)
SAFETY & EMI CERTIFICATES
CE & FCC-B
SPECIFICATIONS
Signamax Connectivity Systems’ Gigabit network adapter cards are used wherever it is necessary to
provide Gigabit Ethernet capability directly into a server or workstation. These cards utilize the new
high-speed 64/32-bit PCI Bus Mastering architecture and support IEEE 802.1p Quality of Service
(QoS) and 802.1Q VLAN Tagging standards for complete network optimization.
The model 098-1122 twisted-pair LAN card supports the IEEE 802.3ab 1000BaseT specification in a
Category 5E or better cabling system, using a standard RJ-45 jack. This card also supports 10BaseT
and 100BaseTX transmission, allowing its use in networks evolving to Gigabit Ethernet.
Gigabit Ethernet PCI Adapter Card
FEATURES
• Supports 64/32 bit, 66/33 MHz PCI Bus Master for high performance
• Full duplex design to double the performance to 20/200/2,000 Mbps
• One STP connector for 1,000 Mbps, 100 Mbps or 10 Mbps network speed
• Support Auto-negotiation function
• Auto-setups IRQ and I/O address
• Supports Virtual LAN (VLAN) and long frame (1,536 Bytes)
• Supports 802.1D and 802.1Q priority queuing
• Net System: NDIS 4,5 driver for Microsoft Windows 95/98, Win2000, Me, Netware driver for Server V.4/5,
UNIX, Linux
• Supports MDIX at 10, 100, 1,000 Mb/s
• Compliant with PC 97 and PC 98 Hardware Design Guides, PC 99 Hardware Design Guide draft. ACPI v1.0,
PCI Power Management Specification v1, OnNow Device Class Power Management Reference
Specification—Network Device Class v1.0a
• Supports Jumbo packets (9K)
• Wake on LAN (WOL) support compliant with PC98, PC99, and OnNow, including directed packets,
Magic Packet TM, ARP packets, pattern mach packets, and Phy status change
• IPv.4 checksum task off-loading