Specifications

B
B9
MEDIA
CONVERTER
SYSTEM
NETWORK CONNECTIVITY SYSTEMS
www.signamax-eu.com
PART NO. DESCRIPTION
065-1800 10/100 to 100FX MM/ST, 2 km Hardened Converter
065-1810 10/100 to 100FX MM/SC, 2 km Hardened Converter
065-1820 10/100 to 100FX SM/SC, 20 km Hardened Converter
065-1820ED 10/100 to 100FX SM/SC, 40 km Hardened Converter
065-1876A 10/100 to 100FX SM/SC, 20 km Single Fibre WDM Hardened Converter
065-1876B 10/100 to 100FX SM/SC, 20 km Single Fibre WDM Hardened Converter
065-1876AED 10/100 to 100FX SM/SC, 40 km Single Fibre WDM Hardened
065-1876BED 10/100 to 100FX SM/SC, 40 km Single Fibre WDM Hardened
065-1830 100FX SM/SC, 20 km to 100FX MM/ST, 2 km Hardened Converter
065-1830ED 100FX SM/SC, 40 km to 100FX MM/ST, 2 km Hardened Converter
065-1832 100FX SM/SC, 20 km to 100FX MM/SC, 2 km Hardened Converter
065-1832ED 100FX SM/SC, 40 km to 100FX MM/SC, 2 km Hardened Converter
065-11DINMT DIN rail mounting bracket for 065-11xx series media converters
Hardened 10/100BaseT/TX to 100BaseFX Converters with LFS
Signamax has responded to the demands of fibre optic deployment in rugged environments
by introducing the 065-1800 series of hardened media converters. The 065-1800 series provides
flexibility in connector types with the extended temperature and humidity ranges required for
high-risk installations. Switching models are available for converting Fast Ethernet twisted pair
copper cabling to both multimode and singlemode fibre optic cabling, including models supporting
single-strand singlemode fibre requirements using Wave Division Multiplexing (WDM) technology.
In addition, Fast Ethernet singlemode to multimode converters round out the line, making Signamax
the choice for your harsh environment Fast Ethernet fibre optic conversion needs. Also Gigabit
models available.
Hardened 10/100 To 100BaseFx Converters
with LFS
SPECIFICATIONS
APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
FIXED PORTS
Switching 10/100 to 100FX models:
1 twisted-pair port meeting IEEE 802.3
10BaseT & IEEE 802.3u 100BaseTX
standard specifications; Category 5 or better
cable, 100 meters maximum distance for
100BaseTX, Category 3 or better cable,
100 meters maximum distance for 10BaseT
plus
1 fibre optic port meeting IEEE 802.3u
100BaseFX standard specification; 62.5/125
or 50/125 micron multimode fibre optic cable,
2,000 meters maximum distance or
1 SC duplex fibre optic port meeting
IEEE 802.3u 100BaseFX standard
specification; 9/125 micron singlemode
fibre optic cable, spanning: 20 kilometers
maximum distance (model 065-1820) or
40 kilometers maximum distance
(model 065-1820ED) or
1 WDM fibre optic port meeting IEEE 802.3u
100BaseFX standard specification;
9/125 micron singlemode fibre optic cable,
spanning: 20 kilometers maximum distance
(models 065-1876A and 065-1876B) or
1 WDM fibre optic port meeting IEEE 802.3u
100BaseFX standard specification;
9/125 micron singlemode fibre optic cable,
spanning: 40 kilometers maximum distance
(models 065-1876AED and 065-1876BED)
100BaseFX single to multimode models:
1 ST duplex fibre optic port meeting
IEEE 802.3u 100BaseFX standard
specification; 62.5/125 or 50/125 micron
multimode fibre optic cable, 2,000 meters
maximum distance (models 065-1830 &
065-1830ED) or
1 SC duplex fibre optic port meeting
IEEE 802.3u 100BaseFX standard
specification; 62.5/125 or 50/125 micron
multimode fibre optic cable, 2,000 meters
maximum distance (models 065-1832 &
065-1832ED) plus
1 SC duplex fibre optic port meeting
IEEE 802.3u 100BaseFX standard
specification; 9/125 micron singlemode
fibre optic cable, spanning: 30 kilometers
maximum distance (models 065-1830 &
065-1832) or
60 kilometers maximum distance
(models 065-1830ED & 065-1832ED)
PERFORMANCE
Latency: < 4.2 µs (LIFO)
Throughput: 148,809 pps @ 100 Mbps;
14,880 pps @ 10 Mbps (64-byte packets)
LEDs
Switching 10/100 to 100FX models:
Per Unit – Power status, Speed (2 LEDs)
Per Port – LNK/ACT, FDX/COL (2 LEDs)
6 LEDs total
100BaseFX single to multimode models:
Per Unit – Power status (1 LED)
Per Port – SDA or SDB (1 LED)
3 LEDs total
PHYSICAL CHARACTERISTICS
Case dimensions (L x W x H):
130 x 110 x 30 mm (5.12 x 4.30 x 1.18")
Fibre connector protrusion varies with model.
Weight: 0.8 kg
Power:
External power supply; 12 Volts DC; 0.5A
Operating temperature:
-34° – 74°C (-30° – 165°F)
Storage temperature:
-45° – 93°C (-50° – 200°F)
Operating & Storage Humidity:
10-95%, non-condensing
EMISSIONS
CC part 15 Class A, CE Mark