Specifications

B
MEDIA
CONVERTER
SYSTEM
TM
www.signamax-eu.com
B8
PART NO. DESCRIPTION
065-1000 10/100BaseT/TX to 100BaseFX, Multimode/ST, 2 km
065-1010 10/100BaseT/TX to 100BaseFX, Multimode/SC, 2 km
065-1020 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 20 km
065-1020ED 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 40 km
065-1020XLD 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 75 km
10/100BaseT/TX Switching Mini Fibre Optic Media Converters
Signamax Connectivity Systems’ Switching Mini Fibre Optic Media Converters
provide an intelligent solution for fibre optic connectivity where simplicity,
low cost, and minimum footprint are the primary considerations. These
converters are designed to handle both legacy 10BaseT and 100BaseTX
Fast Ethernet devices on their twisted pair port while maintaining 100BaseFX
Fast Ethernet transmission on the fibre optic port. Plug-and-play simplicity
makes connection easy.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ45
twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100 switch
enables the fibre cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX
network, while remaining completely 100BaseFX standard-compliant. Fibre connection can also operate
in full duplex mode whether the RJ45 port is connected to a full duplex switch or a half duplex hub.
10/100BaseT/TX Switching Mini
Fibre Optic Media Converters
SPECIFICATIONS
APPLICABLE STANDARDS
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX
FIXED PORTS
1 Auto-MDIX twisted-pair port meeting IEEE
802.3 10BaseT & IEEE 802.3u 100BaseTX
standard specifications; Category 5 or better
cable, 100 meters maximum distance for
100BaseTX, Category 3 or better cable,
100 meters maximum distance for 10BaseT
plus
1 fibre optic port meeting IEEE 802.3u
100BaseFX standard specification;
62.5/125 or 50/125 micron multimode fibre
optic cable, 2,000 meters maximum distance
(model 065-1010 & 065-1010)
or
1 fibre optic port meeting IEEE 802.3u
100BaseFX standard specification;
9/125 micron singlemode fibre optic cable,
spanning:
20 kilometers maximum distance
(model 065-1020)
or
40 kilometers maximum distance
(model 065-1020ED)
or
75 kilometers maximum distance
(model 065-1020XLD)
PERFORMANCE
Latency: < 4.2 µs (LIFO)
Throughput @ 100Base: 148,809 pps
(64-byte packets)
LEDs
Per Port: LNK/ACT TX, LNK/ACT FX
Two LEDs total
PHYSICAL CHARACTERISTICS
Case dimensions (L x W x H):
80 x 54 x 22 mm (3.15 x 2.13 x 0.87")
Fibre optic interface varies with model.
Weight: 0.122 kg
SAFETY
UL Listed
Model 065-1010
Model 065-1000