Specifications

J
PATCH
CORDS
TM
www.signamax-eu.com
J2
C6-114GR
UTP Category 6 Patch Cords
Signamax continues to set the standard for high-quality, high-
performance patch cords. These Category 6 cables are manufactured to
the strictest performance requirements as specified in TIA/EIA-568-B.2-1,
ISO 11801:2002 and EN 50173-1 using the highest-level connector design
and cable construction. Signamax category 6 patch cords incorporate
slim-profile snag-free boots, which protect the plug latch, and a flexible,
but durable cable strain relief. All patch cords use a special new
connector design that assures maximum pair twist for unparalleled
transmission performance and signal integrity. All cords are 100% tested.
UTP Category 6 Patch Cords
Other lengths, colours or halogen free cables on request.
LENGTH GREY GREEN BLUE RED YELLOW
0.5 m C6-114GY-0.5 MB C6-114GR-0.5 MB C6-114BU-0.5 MB C6-114RD-0.5 MB C6-114YE-0.5 MB
1 m C6-114GY-1 MB C6-114GR-1 MB C6-114BU-1 MB C6-114RD-1 MB C6-114YE-1 MB
2 m C6-114GY-2 MB C6-114GR-2 MB C6-114BU-2 MB C6-114RD-2 MB C6-114YE-2 MB
3 m C6-114GY-3 MB C6-114GR-3 MB C6-114BU-3 MB C6-114RD-3 MB C6-114YE-3 MB
5 m C6-114GY-5 MB C6-114GR-5 MB C6-114BU-5 MB C6-114RD-5 MB C6-114YE-5 MB
7 m C6-114GY-7 MB C6-114GR-7 MB C6-114BU-7 MB C6-114RD-7 MB C6-114YE-7 MB
10 m C6-114GY-10 MB C6-114GR-10 MB C6-114BU-10 MB C6-114RD-10 MB C6-114YE-10 MB
C6-114GY