User manual

User Manual
Publication date: Feb., 2013
Revision A3
76
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
path cost ports are chosen as forwarding ports in favor of higher path cost
ports. Valid values are in the range 1 to 200000000.
z Priority :
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
z Buttons
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.