User manual

User Manual

Publication date: Feb., 2013

Revision A3

3-3.2.4 Port Statistics

This section describes that when you complete to set LACP function on the switch then it

provides a Port Statistics overview for all LACP instances

Web Interface

To display the LACP Port status in the web interface:

1. Click Configuration, LACP, Port Statistics

2. If you want to auto-refresh the information then you need to evoke the

“Auto refresh”.

3. Click “Refresh“ to refresh the LACP Statistics.

Figure 3-3.2.4: The LACP Statistics

Parameter description:

z Port :

The switch port number.

z LACP Received :

Shows how many LACP frames have been received at each port.

z LACP Transmitted :

Shows how many LACP frames have been sent from each port.

z Discarded :

Shows how many unknown or illegal LACP frames have been discarded at each

port.

z Auto-refresh:

To evoke the auto-refresh to refresh the information automatically.

z Upper right icon (Refresh, Clear)

You can click them for refresh the LACP port statistics information or clear by

manual.