User manual

User Manual
Publication date: Feb., 2013
Revision A3
64
3-3.2.2 System Status
This section describes that when you complete to set LACP function on the switch then it
provides a status overview for all LACP instances
Web Interface
To display the LACP System status in the web interface:
1. Click Configuration, LACP, System Status
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. Click “Refresh“ to refresh the LACP System Status.
Figure 3-3.2.2: The LACP System Status
Parameter description:
z Aggr ID :
The Aggregation ID associated with this aggregation instance. For LLAG the id
is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'
z Partner System ID :
The system ID (MAC address) of the aggregation partner.
z Partner Key :
The Key that the partner has assigned to this aggregation ID.
z Last changed :
The time since this aggregation changed.
z Local Ports :
Shows which ports are a part of this aggregation for this switch. The format is:
"Switch ID:Port".
z Auto-refresh:
To evoke the auto-refresh to refresh the information automatically.
z Upper right icon (Refresh)
You can click them for refresh the LACP System status information by manual.