User manual

Publication date: Feb., 2013
Revision A3
59
z Rate Limiter :
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16.
When Disabled is displayed, the rate limiter operation is disabled.
z Port Redirect :
Indicates the port redirect operation of the ACE. Frames matching the ACE are
copied to the port number. The allowed values are Disabled or a specific port
number. When Disabled is displayed, the port copy operation is disabled.
z Mirror :
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
z CPU :
Forward packet that matched the specific ACE to CPU.
z CPU Once :
Forward first packet that matched the specific ACE to CPU.
z Counter :
The counter indicates the number of times the ACE was hit by a frame.
z Conflict :
Indicates the hardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
z Auto-refresh:
To evoke the auto-refresh to refresh the information automatically.
z Upper right icon (Refresh)
You can click them for refresh the ACL status information by manual.