User manual

Publication date: Feb., 2013

Revision A3

: Inserts a new ACE before the current row.

: Edits the ACE row.

: Moves the ACE up the list.

: Moves the ACE down the list.

: Deletes the ACE.

: The lowest plus sign adds a new entry at the bottom of the ACE listings.

z Buttons

Auto-refresh – Check this box to refresh the page automatically. Automatic

refresh occurs at regular intervals.

Refresh - Click to refresh the page; any changes made locally will be undone.

Clear- Click to clear the counters.

Remove all - Click to remove all ACEs.

Parameter description:

z Ingress Port :

Select the ingress port for which this ACE applies.

All: The ACE applies to all port.

Port n: The ACE applies to this port number, where n is the number of the

switch port.

z Policy Filter :

Specify the policy number filter for this ACE.

Any: No policy filter is specified. (policy filter status is "don't-care".)

Specific: If you want to filter a specific policy with this ACE, choose this value.

Two field for entering a policy value and bitmask appears.

z Policy Value :

When "Specific" is selected for the policy filter, you can enter a specific policy

value. The allowed range is 0 to 255.

z Policy Bitmask :

When "Specific" is selected for the policy filter, you can enter a specific policy

bitmask. The allowed range is 0x0 to 0xff.

z Frame Type :

Select the frame type for this ACE. These frame types are mutually exclusive.

Any: Any frame can match this ACE.

Ethernet Type: Only Ethernet Type frames can match this ACE. The IEEE

802.3 describes the value of Length/Type Field specifications to be

greater than or equal to 1536 decimal (equal to 0600 hexadecimal).

ARP: Only ARP frames can match this ACE. Notice the ARP frames won't match

the ACE with Ethernet type.

IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't

match the ACE with Ethernet type.

IPv6: Only IPv6 frames can match this ACE. Notice the IPv6 frames won't

match the ACE with Ethernet type.