User manual

User Manual
Publication date: Feb., 2013
Revision A3
50
value is 0.
z Action :
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is
"Permit".
z Rate Limiter ID :
Select which rate limiter to apply on this port. The allowed values are Disabled or the
values 1 through 16. The default value is "Disabled".
z Port Redirect :
Select which port frames are redirected on. The allowed values are Disabled or a specific
port number. The default value is "Disabled".
z Mirror :
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
z Logging :
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and logging
rate is limited.
z Shutdown :
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
z State :
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL user
module.
Disabled: To close ports by changing the volatile port configuration of the ACL user
module.
The default value is "Enabled".
z Counter :
Counts the number of frames that match this ACE.
z Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved values.
Refresh – Click to refresh the page; any changes made locally will be undone.
Clear - Click to clear the counters.