User manual

Publication date: Feb., 2013
Revision A3
45
3-1.6 SFP Information
The section describes that switch could display the SFP module detail information which you
connect it to the switch. The information includes: Connector type, Fiber type, wavelength,
baud rate and Vendor OUI etc.
Web Interface
To Display the SFP information in the web interface:
1. Click Configuration, Port, then SFP Information
2. To display the SFP Information.
Figure 3-1.6: The SFP Information Overview
Parameter description:
z Connector Type:
Display the connector type, for instance, UTP, SC, ST, LC and so on.
z Fiber Type:
Display the fiber mode, for instance, Multi-Mode, Single-Mode.
z Tx Central Wavelength:
Display the fiber optical transmitting central wavelength, for instance, 850nm,
1310nm, 1550nm and so on.
z Baud Rate:
Display the maximum baud rate of the fiber module supported, for instance,
10M, 100M, 1G and so on.
z Vendor OUI:
Display the manufacturer's OUI code which is assigned by IEEE.
z Vendor Name:
Display the company name of the module manufacturer.
z Vendor P/N: