User manual

Publication date: Feb., 2013
Revision A3
29
2-6.4 Users
The function is used to configure SNMPv3 user. The Entry index key is User Name. To
create a new User Name account, please check <Add new user> button, and enter the user
information then check <Save>. Max Group Number: 10.
Web Interface
To display the configure SNMP Users in the web interface:
1. Click SNMP, Users.
2. Specify the Privilege parameter.
3. Click Save.
Figure 2-6.4: The SNMP Users Configuration
Parameter description:
z Delete
Check to delete the entry. It will be deleted during the next save.
z User Name
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is ASCII characters from 33 to
126.
z Security Level
Indicates the security model to which this entry should belong. Possible
security models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That
means it must first be ensured that the value is set correctly.
z Authentication Protocol
Indicates the authentication protocol to which this entry should belong. Possible
authentication protocols are: