User manual

User Manual
Publication date: Feb., 2013
Revision A3
24
2-5.2 Log
This section describes that display the system log information of the switch
Web Interface
To display the log configuration in the web interface:
1. Click Syslog, Log.
2. Display the log information.
Figure2- 5.2: The System Log configuration
Parameter description:
z Auto-refresh
To evoke the auto-refresh icon then the device will refresh the log automatically.
z Level
Level of the system log entry. The following level types are supported:
Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log.All: All levels.
z ID
ID (>= 1) of the system log entry.
z Time
It will display the log record by device time. The time of the system log entry.
z Message
It will display the log detail message. The message of the system log entry.
z Upper right icon (Refresh, clear,….)
You can click them for refresh the system log or clear them by manual, others
for next/up page or entry.