User manual

Publication date: Feb., 2013
Revision A3
261
5-5 Diagnostics
This section provides a set of basic system diagnosis. It let users know that whether the
system is health or needs to be fixed. The basic system check includes ICMP Ping, ICMPv6,
and VeriPHY Cable
Diagnostics.
5-5.1 Ping
This section allows you to issue ICMP PING packets to troubleshoot IPv6 connectivity issues.
Web Interface
To configure an ICMP PING Configuration in the web interface:
1. Specify ICMP PING IP Address.
2. Specify ICMP PING Size.
3. Click Start.
Figure 5-5.1: The ICMP Ping
Parameter description:
z IP Address :
The destination IP Address you want to ping it.
z Ping Length:
The payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes.
z Ping Count:
The count of the ICMP packet. Values range from 1 time to 60 times.
z Ping Interval:
The interval of the ICMP packet. Values range from 0 second to 30 seconds.
After you press, 5 ICMP packets are transmitted, and the sequence number and roundtrip
time are displayed upon reception of a reply. The page refreshes automatically until
responses to all packets are received, or until a timeout occurs.
PING6 server ::10.10.132.20
64 bytes from ::10.10.132.20: icmp_seq=0, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=1, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=2, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=3, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad