User manual

User Manual
Publication date: Feb., 2013
Revision A3
254
5-2 Firmware
This section describes how to upgrade Firmware. The Switch can be enhanced with more
value-added functions by installing firmware upgrades.
5-2.1 Firmware Upgrade
This page facilitates an update of the firmware controlling the Switch.
Web Interface
To configure a Firmware Upgrade Configuration in the web interface:
1. Chick Browser to select firmware in you device.
2. Click Upload.
Figure 5-2.1: The Firmware update
Parameter description:
z Browse :
Click the “Browse...” button to search the Firmware URL and filename.
z Upload:
Click the “Upload” button then the switch will start to upload the firmware from firmware
stored location PC or Server.
NOTE: This page facilitates an update of the firmware
controlling the switch. Uploading software will update all
managed switches to the location of a software image and
click. After the software image is uploaded, a page
announces that the firmware update is initiated. After about
a minute, the firmware is updated and all managed switches
restart. The switch restarts.
W ARNING : While the firmware is being updated, Web access
appears to be defunct. The front LED flashes Green/Off with
a frequency of 10 Hz while the firmware update is in
progress. Do not restart or power off the device at this time
or the switch may fail to function afterwards.