User manual

User Manual
Publication date: Feb., 2013
Revision A3
234
The RADIUS Accounting Server number for which the configuration below applies.
z Enabled :
Enable the RADIUS Accounting Server by checking this box.
z IP Address/Hostname :
The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in
dotted decimal notation.
z Port :
The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the
default port (1813) is used on the RADIUS Accounting Server.
z Secret :
The secret - up to 29 characters long - shared between the RADIUS Accounting Server
and the switch.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns,
which are:
z # :
The TACACS+ Authentication Server number for which the configuration below applies.
z Enabled :
Enable the TACACS+ Authentication Server by checking this box.
z IP Address/Hostname :
The IP address or hostname of the TACACS+ Authentication Server. IP address is
expressed in dotted decimal notation.
z Port :
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0 (zero),
the default port (49) is used on the TACACS+ Authentication Server.
z Secret :
The secret - up to 29 characters long - shared between the TACACS+ Authentication
Server and the switch.
z Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.