User manual

User Manual
Publication date: Feb., 2013
Revision A3
16
The format in which to type the password. The allowed string length is 0 to 255, and the
allowed content is the ASCII characters from 32 to 126.
z Password (again)
To type the password again. You must type the same password again in the field.
z Privilege Level :
The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15,
it can access all groups, i.e. that is granted the fully control of the device. But others value
need to refer to each group privilege level. User's privilege should be same or greater than
the group privilege level to have the access of that group. By default setting, most groups’
privilege level 5 has the read-only access and privilege level 10 has the read-write access.
And the system maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest account.
NOTE: You can add more user name up to 19 set in Users
configuration. You can configure 20 set of user name totally
including admin account.