User manual

Publication date: Feb., 2013

Revision A3

minute at the time since it passed over.

The switch supports valid configurable day light saving time is –5 ~ +5 step one hour. The

zero for this parameter means it need not have to adjust current time, equivalent to in-act

daylight saving. You don’t have to set the starting/ending date as well. If you set daylight

saving to be non-zero, you have to set the starting/ending date as well; otherwise, the

daylight saving function will not be activated.

z Time Set Offset:

Provide the Daylight saving time set offset. The offset is given in minutes east of GMT. The

valid range is from 1 to 1440 minutes. Default is 60 mins.

z Daylight Savings Type:

Provide the Daylight savings type selection. You can select “By Dates” or “Recurring” two

types for Daylight saving type.

z From:

To configure when Daylight saving start date and time will begin, the format is “YYYY-MM-

DD HH:MM”.

z To:

To configure when Daylight saving end date and time will end, the format is “YYYY-MM-DD

HH:MM”.

NOTE: The under “from

”

and “to

”

was displayed what you set

on the “From” and “To” field information.