User manual

User Manual
Publication date: Feb., 2013
Revision A3
196
3-19 Easy Port
Easy Port provides a convenient way to save and share common configurations. You can use
it to enable features and settings based on the location of a switch in the network and for
mass configuration deployments across the network. You could easy to implement included
Voice IP phone, Wireless Access Point and IP Camera…etc.
Others you can leverage
configuration to run a converged voice, video, and data network considering quality of service
(QoS), bandwidth, latency, and high performance.
Web Interface
To configure the Easy Port in the web interface:
1. Click Configuration, Easy Port.
2. Set the parameters
3. Scroll to Role for what kind device you want to set on the Easy Port and connect to.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
.
Figure 3-19.1: The Easy Port Configuration
Parameter description:
z Port Members :
A row of check boxes for each port is displayed for each VLAN ID.
To include a port in an Easy Port, check the box as
.
Remove or exclude the port from the VLAN, make sure the box is unchecked as shown
.
By default, no ports are members.
z Role :
The port role is based on the type of devices to be connected to the switch ports. To scroll
to select what kind device you want to connect and implement with the Easy Port setting.