User manual

User Manual
Publication date: Feb., 2013
Revision A3
192
z Port No:
The switch port number of the port.
z Enable :
Controls whether loop protection is enabled on this switch port.
z Action:
Configures the action performed when a loop is detected on a port. Valid values are
Shutdown Port, Shutdown Port and Log or Log Only.
z Tx Mode :
Controls whether the port is actively generating loop protection PDU's, or whether it is just
passively looking for looped PDU's.
z Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.