User manual

ManualsBrandsSignaMax ManualsComputer equipment065-7861

User Manual

Publication date: Feb., 2013

Revision A3

About This Manual

The products and programs described in this guide are licensed products of

Signamax, Inc.. This manual contains proprietary information protected by

copyrighted. No parts of this manual may be copied, photocopied, reproduced,

translated or reduced to any electronic medium or machine-readable from by

any means by electronic or mechanical. It includes photocopying, recording, or

information storage and retrieval systems, for any purpose other than the

purchaser’s personal use, and without the prior express written permission of

Signamax, Inc..

Purpose

This manual gives specific information on how to operate and use the

management functions of the switch.

Audience

The Manual is intended for use by network administrators who are responsible

for operating and maintaining network equipment; consequently, it assumes a

basic working knowledge of general switch functions, the Internet Protocol

(IP), and Simple Network Management Protocol (SNMP).

Conventions

The following conventions are used throughout this manual to show

information.

Warranty

See the Customer Support/ Warranty booklet included with the product. A

copy of the specific warranty terms applicable to your Signamax, Inc. products

and replacement parts can be obtained from your Signamax, Inc. Sales and

Service Office authorized dealer.

Disclaimer

Signamax, Inc. does not warrant that the hardware will work properly in all

environments and applications, and marks no warranty and representation,

either implied or expressed, with respect to the quality, performance,

merchantability, or fitness for a particular purpose. Signamax, Inc. disclaims

liability for any inaccuracies or omissions that may have occurred. Information

in this manual is subject to change without notice and does not represent a

commitment on the part of Signamax, Inc.. Signamax, Inc. assumes no

responsibility for any inaccuracies that may be contained in this manual and

makes no commitment to update or keep current the information in this

manual. Signamax, Inc. reserves the righter to make improvements to this

manual and /or to the products described in this User Manual, at any time

without notice.

FCC Warning

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the CE/FCC remove Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the Instruction manual, may cause

harmful interference to radio communications.

FCC Caution

To assure continued compliance (example-use only shielded interface cables

when connection to computer or peripheral devices). Any changes or

modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment. This device complies

with Part 15 of the FCC Rules. Operation is subject to the Following two

conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operation.

CE mark

Warning

This is a Class A device. In a domestic environment this product may cause

radio interference, in which case the user may be required to take adequate

measures.