User manual

Publication date: Feb., 2013
Revision A3
187
The value accepted is within the range of 1-65535. But an appropriate port number not
used by other protocols need to be configured. By default, the port's number is 6343
z Time out :
It is the duration during which the collector receives samples; once it is expired, the
sampler stops sending the samples. It is through the management the value is set before it
expires. The value accepted is within the range of 0-2147483647. By default it is set to 0.
z Datagram Size :
It is the maximum UDP datagram size to send out the sFlow samples to the receiver. The
value accepted is within the range of 200-1500 bytes. The default is 1400 bytes.
z Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.