User manual

Publication date: Feb., 2013
Revision A3
183
3-15 Thermal Protection
The section allows the user to inspect and configure the current setting for controlling thermal
protection. Thermal protection is used to protect the chip from getting overheated.
3-15.1 Configuration
The section describes the user to inspect and configure the current setting for controlling
thermal protection. Thermal protection is used to protect the chip from getting overheated.
When the temperature exceeds the configured thermal protection temperature, ports will be
turned off in order to decrease the power consumption. It is possible to arrange the ports with
different priorities. Each priority can be given a temperature at which the corresponding ports
shall be turned off
Web Interface
To configure the Thermal Protection in the web interface:
1. Click Configuration, Thermal Protection, Configuration
2. Specify the temperature in the priority 0 to 3
3. Scroll to set the Priority
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 3-15.1: The Thermal Protection Configuration
Parameter description:
Temperature settings for priority groups
The temperature at which the ports with the corresponding priority will be turned off.
z Priority :