User manual

Publication date: Feb., 2013
Revision A3
179
port range applicable for IP protocol UDP/TCP
Dport: Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP
6. IPv6 : Protocol: IP protocol number: (0-255, TCP or
UDP) or 'Any'
Source IP: IPv6 source address: (a.b.c.d) or 'Any', 32 LS
bits
DSCP: Diffserv Code Point value (DSCP): It can be specific
value, range of value or 'Any'. DSCP values are in the range
0-63 including BE, CS1-CS7, EF or AF11-AF43
Sport: Source TCP/UDP port:(0-65535) or 'Any', specific or
port range applicable for IP protocol UDP/TCP
Dport: Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP
z Action Parameters :
Class: QoS Class: "class (0-7)", default- basic classification
DP: Valid DP Level can be (0-3)", default- basic classification
DSCP: Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43)
z Buttons:
Apply– Click to apply the configuration and move to main QCL page.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Cancel–Return to the previous page without saving the configuration change.