User manual

User Manual
Publication date: Feb., 2013
Revision A3
174
Parameter description:
z DSCP :
Maximum number of supported DSCP values is 64 and valid DSCP value ranges from 0 to
63.
z Ingress :
Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS
class and DPL map.
There are two configuration parameters for DSCP Translation –
1. Translate: DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify: Click to enable Classification at Ingress side.
z Egress :
There are following configurable parameters for Egress side –
1. Remap DP0: Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63
2. Remap DP1: Select the DSCP value from select menu to which you want to remap.
DSCP value ranges form 0 to 63.
There is following configurable parameter for Egress side -
• Remap: Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
z Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.